jctjct
-
Posts
280 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by jctjct
-
Correct me if I'm wrong, but if this extra geometry is somehow associated with the solid it may need to xform with it?
-
Can anyone comment on whether you can redock the toolpath/solids manager in X2?
-
Maybe try slice??
-
It happens to me a lot when I am hitting (e) trying to get hot key for endpoint.
-
Project them.
-
I am using 2 20" widescreens as well with latest Quadro drivers, version 91.36. It was just fine with one @ 1680x1050, and even better with 2 side by side at that resolution.
-
I am also using FX1300. I have noticed that after chaining something, like for solid extrude, when I hit the green checkmark the chain loses its color - in my case yellow. Sometimes only some of it goes back to the original color, sometimes all of it. Not a big deal, but definitely annoying. Is there any other setting that might affect this?
-
I have had this happen if any of my 2d contour ops have control for cutter compensation type.
-
Edit - Simplify.
-
That is exactly what I was looking for. Thanks Thad.
-
I'm talking about aptitude test, not alcohol test. l
-
-bump- Does anybody have a copy of the test mentioned in this thread?
-
I have used a USB to COM adaptor for a laptop, but it was a cheap one. I ran into problems with it dropping huge chunks of code in the process with no warning - quite a surprise when runnung the first part. Be careful.
-
Edit - Trim/ break - toggle from trim to break - then on the left select trim to point - then select midpoint or whatever. Hope that's what you're looking for.
-
QUADRO FX 1400 PCI-E CONFIGURATION
jctjct replied to Matt Berube at Ferron Mold's topic in Industrial Forum
I just got a Quadro FX 1300 PCiE. I sure am glad I remebered this thread because my backplot kept backing up too. There is no way I would have ever stumbled onto that fix by myself. -
bump?
-
I have seen this before too, and after a few times stopped using it. I am very curious to hear a solution or even a workaround because this feature is sometimes very useful.
-
Offset contour is a function that doesn't work with preselection, at least for me.
-
I think I have some pictures. Would that help any?
-
I have seen it do this just working with geometry, using offset contour, not even doing a toolpath.
-
That did it. Thanks again John.
-
Since updating to MR@ my setup sheet is triggering and working like it did, however the program name keeps coming up as "NC GROUP" everytime, regardles of what I set the NC File name to. I remebering this happening when I first transitioned to X, and was solved by changing the file name in the Files tab under properties in the ops manager. Anyone else having this problem?
-
Remember we had carts full of them, but no one recalls where they came from.
-
While you are laughing, can you recall our old supplier.
-
Thanks Chris, I will look into these.