savagkd
-
Posts
238 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by savagkd
-
Got my read/write Privilege, All is good. Thanks Keith
-
Thanks. I don't have permission to delete the file. I'll have to call the dreaded I.S. Thanks anyway.
-
Hi All. On one of our four workstations, when I change anything in screen configure and save a new .cfg I get two errors: Warning - error opening c:mcam9millopsdefaults.df9 and Warning - error opening c:mcam9mil9.cfg The changes take effect and all seems fine, I just don't know why the errors. Version 9.1 SP2 Thanks Keith
-
We use Mpltrack.pst on our LX3. I have only used it once, It worked. Had to change the file extension to .cam and loaded from disk. HTH Keith
-
Threept82, Can you put it on the FTP. I'd be happy to look at it. Keith
-
I use "Rough Touch SCRUBS in-a-bucket" hand cleaner towels. Pull one out of the dispenser and wipe the grime off. They work great. Keith
-
Try SPSTech I think they can manufacture just about anything. HTH Keith
-
Chris, When you changed the baud, did you also change it at the machine to match? Keith
-
Chris, The settings you have are the same as mine for aur FADAL. The only thing I might suggest is, try a lower baud rate. HTH Keith
-
Thanks Tommy. Great info!
-
Thanks Guys. Is anyone using Diamond cutters?
-
Bump
-
For tool cost vs. life in MDF. What do you use? Can you recommend a supplier? Thanks Keith
-
Brendan, We always let MC calculate the feed. Never had a problem. I've never heard of reducing the feed by 10%. HTH Keith
-
D-Proto, Welcome to the forum!
-
I gave up on importing UG or Ideas files. Way too many problems (intersections that aren't trimmed, holes between surfaces, etc.) Now they send me the wire frame and I create the solids. It might be an IGES translation problem, I don't know. Can't get them to pay for a parasolid translator. Keith
-
Scott, If the boss won't spring for the training, see if he will pony up $1500. for the triple diamond partnreship program. I've never waited more than 20 minutes for a call back from MC Machinery, and they will spend as much time on the phone as you need to solve any problem you may have. Keith
-
RAJ, As to rust on the worc piece, we bead blast. For rust on the work holding fixtures, I wax them every six months or so. HTH Keith
-
Don, That is a great site! I'll have our noobs working on that one. Thanks Keith
-
-
Can you remachine the original ops only, then transform the new tool path? HTH Keith
-
Don't know if they can help, but they should be able to put you on the right track. Detroit Broach Company 2750 Paldan Drive Auburn Hills, MI 48326 Toll Free: 800-370-0593 Voice: 248-370-0600 Fax: 248-370-9110 HTH Keith
-
tada, On our Mitz, if you are cutting with the land down, your land height would be .25". Z0 is always the table, and all Z heights are posative from there. HTH Keith
-
Welcome to the forum. quote: I suggest calling your Mastercam dealer and asking him to come by, he should be happy to make a pitch to the boss AND he can help you with some questions. +1 Bernie, Sounds like you've been kicked head first into the fire. How many .pst files do you have on your pewter? Are you using the correct one for your machine tool? Your MC Dealer can make sure that you are using the correct one, and answer most, if not all of your questions in a short time. HTH Keith
-
Greg, Can I contact you offline and try to work this out? Thanx Keith