Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

MuR0904......I think I did it

Toolfab

By Toolfab,
in Industrial Forum

 Share

Recommended Posts

G Caputo Newbie

G Caputo

Posted
Posted

quote:
Check Holder chooks (CKHolder)

 

This chook will check one operation’s holder for interference with the part (surfaces and solids). This program is interactive and allows the results to be quickly view

Are there more pages to the details document, or was the last word supposed to be viewed instead of view? It kinda just stops abruptly on page 2.

Link to comment
Share on other sites
Thad Enthusiast

Thad

Posted
Posted

From the MC update page:

quote:
Two Backup directories have been made in the root of Mastercam (BackupApps and BackupChooks), in the event a user wants to revert back to MR0304.

Marc Lindsey said:

quote:
If you have a "backup" and "backupapps" folder in your mcam9 folder then the patch has been installed.

I'll use Marc's quote as confirmation that my update has been installed. The wording in the instructions at MC's site is incorrect. There is no folder called BackupChooks. It's called BACKUP.

 

Thad

Link to comment
Share on other sites
somename75 Newbie

somename75

Posted
Posted

In the maintenance section, there is a lits of the bug numbers that are addressed by the sept. update, anyone got a text list of what those bugs are? Would just like to know because there are currently features I dont use, or have work-arounds for, and would like to know if there now work as the are supposed to without having to trial and error my way through. Thanks a lot guys, Have a great day

Link to comment
Share on other sites
M. Anderson Newbie

M. Anderson

Posted
Posted

+100 - Somename75 cheers.gif

 

Definitely - Some help, PLEASE, a list of numbers don’t tell a whole lot! frown.gif

 

quote:
Along with the enhancements, the following defects have been addressed.

 

24579-24821-2445 -620-1337-2867-3101-3589-3797-4774-4873-747-924-925-601-2671-2861-983-25229-2934-3078-2710-3213--3365-3527-3430-3365-3527-2775-3675-3748-3801-3864-3924-4564-4564-4564-2704-4692-487 7-4874

Thanks,

 

Mark

Link to comment
Share on other sites
Mike Whitten CAD/CAM Contractors Newbie

Mike Whitten CAD/CAM Contractors

Posted
Posted

FYI,

 

I just loaded the update and found a file: APPMCH9.DOC It looks like the surface machining fixes

 

BUG CORRECTIONS:

This app includes all corrections, improvements for toolpath/surface

in MR0304 plus the following:

#747-fix crash in Rough/Pocket quick zigzag (fix memory handling)

#924-fix FZT failure on big part

#925-fix error reporting for FZT

#601-fix crash in undercut cutter comp of slot mill w/ "flat" on tool's side

#2671-RghPock:fix gouge of plunge outside, troch cuts on, spiral inside out

#2861-fixed check surface processing in FZT

#983-fixed crash in FZT

#25229-fixed bug in memory allocation (no scallop cut found) (3d collapse)

#2934-fixed bug in edge protection (undercut) with dove mill (finish/contour)

(this one is improved but not fully corrected)

#3078-fixed crash in rough/restmill

#2710-fixed incorrect cut order optimization (restmill and contour)

#3213-properly handle "touch" case in FZT (finish/contour)

#????-speed up FZT for tool containment boundary usage

#3365-fixed incorrect view used for inc. depths when hidden faces are skipped.

#3527-fixed entry/exit arc gouge (closed cuts, finish/contour)

#3430-fixed gouge in rough/pocket

#3365-fixed inc.depth bug in rgh/pock with solid in view other than top.

#3527-fixed entry/exit arc gouge (finish/contour)

#2775-fixed project/blend gouge

#3675-fixed plunge in rgh passes (rgh/parallel, rgh/radial, rgh/project...)

#3748-fixed taper tool in FZT surface/contour,pocket,restmill

#3801-fixed gouge in sharp corner smoothing (pocket)

#3864-"

#????-fixed crash in quick zigzag (rare)

#3924-fixed "equal" case when machining vert steep wall ast 45 deg (parsteep)

#4564-fixed tcb offset inside (out of tolerance)

#4564-fixed critical depths (duplicate cut)

#4564-fixed prefilter arc error (gouge in srf/rgh/pocket motion) with FZT

#2704-fixed FZT for face mills with zero taper

#4692-fixed restmill comp to center when not using prv ops rgn file

#4877-fixed absolute feed planes in rghpock keep down effort

#4874-fixed FZT failure with large part

-------------------------------------------------------------------------

 

Mike

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...