I'm ready to tackle G-View, WCS if someone will help...

[Thad]

Excellent job, Jay. Very well done!

 

Thad

[Jayson Kramer]

Thank you Thad, going to do an updated one that will include Dynamic WCS . I just love that tool.

[Reko]

Yes, nice video Jay.

 

I've been playing with Dynamic WCS. It's kewl. It works like Dynamic Xform... I like that too.

[Newbeeee™]

Jay,

Thanks for doing this.

Very enlightening

[Jayson Kramer]

Derek any time you have some great stuff. Nice of you to throw a few free bones on the table.

PS see you soon.

 

Jay

[SydwazShawn]

This has some info in it.

 

 

Older post about WCS

[Jayson Kramer]

Derek I need to get back into this and help you a little to. what version of Camtasia are you using?

Also I need to know some of your settings for your site so the videos are right for you.

We need to talk soon..

 

Jay

[chuck56]

I guess the next question is where do I get this right?

 

Look here: Look for the Download here.

 

HTH

 

Ron, I'm very interested in the "FREE Verisurf add-on for Mastercam", but the above link appears to have changed. Could you re-post the "Verisurf add-on"

 

Thanks so much,

Regards,

Chuck

[Mr. Wizzard]

Nice work, guys. WCS, t-planes, c-planes, g-views, all used to be confusing to me, as well. After using them every day, I feel they are very powerful tools. Once you know when to use which one(s) and how, I feel it makes things much easier. I think they are underestimated and underused because a lot of people just see them as useless confusion and think it's easier to just flip the part model a dozen times and turn levels on and off. Once you take the time to learn them, it will make you programming time much more efficient, your files smaller and less confusing, and unclutter your levels.

Good job on explaining this gents!!

[Todd Tracey from Fastech]

Verisurf works with FARO, Romer and more. FARO typically sells a competing software brand.

[Jayson Kramer]

Ron, I'm very interested in the "FREE Verisurf add-on for Mastercam", but the above link appears to have changed. Could you re-post the "Verisurf add-on"

 

Thanks so much,

Regards,

Chuck

Chuck here is the link from the top of this forum Page.

Verisurf Hole Axis tool

[Jayson Kramer]

Also have you folks review working with the WCS along with the View Sheets option.

Works really nice with different views and if you have different fixture for different views and WCS's you do not have to keep turning on the levels and setting planes and WCS just pick the tap and be set.

I will try this weekend to show an example of a project I just did.

[mikechvz]

how do i get that Verisurf add-on?

[Reko]

how do i get that Verisurf add-on?

 

It's actually pinned, but here it is anyway.

 

Linky

[gcode]

the link 3 4 posts up from this one