I'm out of Work - Can you Help ?

[Ed. R.]

An open plea to everyone....

 

Our company is in trouble, due to the 'economy

stupid'

 

I was laid-off for lack of work yesterday.

 

This has got-to-be tied for the worst thing

that can happen.

 

Can anyone help? Do you know of any company

that is in need of a MasterCam Programmer,

or Machinist.

 

I will relocate. I will consider

anything. It sure would be nice to find a

company that 'cares' about their employees,

values their contributions, has a clean shop,

and furnishs enough tooling to do the job.

(Am I joking or what?)

 

If you have any help to give and don't want

to post here please e-mail me.

 

My e-mail is: [email protected]

[Guest CNC Apps Guy 1]

Try looking here;

 

Mastercam Jobs

 

HTH

 

Good Luck,

[roy g. biv]

I found my current job at monster.com .

 

Or try contacting your local reseller.

 

Good luck

[Guy Arseneault]

CADCAM has a thread looking for a MC user. Check it out.

 

http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=003857

 

Guy

[TheePres]

Ed R.,

Good luck in your search. I found cool job site that combines most other sites in one roof. FlipDog.Com.

Hey all I need job also!!!! Orange or LA would be nice.

[Tony]

My buddy is looking for someone at his shop.

I always turn him down, but say Thank You

for thinking of me.

 

He says "What's wrong, you don't like working on stuff thats Always five days late as soon as you get your hands on it,60+ hours aweek,No talking,

No phone calls,No time off,and as soon as we slow down or you make one mistake we let you go"?

 

There in Carol stream IL.

I'll call him if you want.

[Ed. R.]

Tony,

 

I am indeed looking, but, not yet ready to

consider Illinois. I'm in Salem, Oregon.

 

However, I must tell all you guys and gals,

This is a SUPER SITE. I've enjoyed it and

learned some things between the banter that

goes on.

 

Tony, that's a terrific offer by you, I'll

remember your name. Thanks a bunch

[Roger Peterson]

Tony, I think you forgot to mention you have to punch out to use the restroom.

 

and you have to supply your own end mills

 

[ 09-12-2002, 05:20 PM: Message edited by: Roger ]

[Tony]

Roger

Your right Endmills/Inserts are GOLD there!

Not to mention every grinding wheel

Averages about 4" in dia too.

Those types of shops are Where I learned

The most in the shortest amount of time

I must admit.

I worked at two of them for three years each.

 

[ 09-12-2002, 06:15 PM: Message edited by: Tony ]

[TheePres]

Thats shop im stuck in now!!

2 pcs of material to make 3 parts also.

[Davidgil]

Ed.

We're located in Sherwood, Or. Not too far from you. We are looking into hiring a programmer/machine operator. I would be interested in looking at your resume. If you'd like, you can send your resume to me at [email protected]

Regards,

David

[Jim Whipple]

I heard Davis Tool in Hillsboro is looking for a 5 axis MC programer too...

Jim

[Ed. R.]

David

 

That's terrific.

 

My resume will be delivered by e-mail

shortly. Thanks for looking at it.

 

Jim,

 

I'm not able to do 5 axis yet. Am currently

enrolled back in the local college though to

further my skills.

 

I'll tell all you people, this is a terrific

place .........

[ROB]

you can also try this website.

lots of info and jobs if you are willing to relocate!

 

http://www.cncci.com/

[Davez]

Hey ed, I would like to take a look at your resume if you are sending it around. We are not looking to hire anyone next week, but we have been quoting quite a bit of work recently, and things can change fast as I'm sure you know. Have a nice day everyone

 

[email protected]

[Ed. R.]

Rob,

 

Thanks I will

 

Zarb

 

That's Super! It's on it's way.

 

This is sure helping this lousy week ....

[Ed. R.]

To those Interested....

 

I have been as fortunate as possible thru

this site to have four local inquiries.

 

Now it's up-to-me.

 

We're a lucky group to have found each

other. THANKS for your help !!

 

Ed

[Thad]

Good luck, Ed!

 

Thad