Post for Fanuc oi-t, Hwacheon

[STEVEOL]

Anybody out there have a good post for this lathe.

We seem to keep having problems with the posts that are supplied with Mastercam. After spending ALL that money for the software, they want us to spend more for a good post??

[biss03]

is this guy serious?????

 

let the fun begin.

 

dude if your serious, read the last 2 locked posts and learn

[CAM-mando]

From the FAQ:

 

Q. Does anyone have a post for a [insert machine or control name here]?

 

A. Ask this question as your first message here and you won't necessarily like the responses you receive. Look to your reseller to supply you with the proper post for your machine, or quote for the work that needs to be done.

 

If you have something and are looking for improvements, it's a reasonable request. Maybe tell us why the post you have needs improvement.

 

Perhaps try to participate a bit on the Forum before you go asking for something. Not unlike Habitat for Humanity, we value Sweat Equity here. Quid pro quo, Clarice.

 

You may also want to let everyone know your company name so that your Hotmail or Yahoo email account doesn't give everyone the impression that you aren't a licensed Mastercam user.

 

CAM teh R.I.F. (sorry 'rekd)

[Jody]

This looks like a busy week for asking for post's

 

poor newbie's

[Philcott]

Stevol,

 

You might want to edit your first posting on the forum. Search the forum for similar requests and you will see the reactions it will get.

Just so you know you can get a lot of help in here but coming in with your hand out saying gimme, gimme, gimme is not the accepted way to get it.

 

Good luck and brace yourself for a bumpy start on your mastercam ride.

 

Phil

[gcode]

I wonder if there's a new batch of crack

making the rounds ????

[MACHINEMASTERG]

i thought the same thing when i bought that new car all this money$$$ and i still have to pay for the gas ??? what gives man im going back to walking

[robk]

quote:

---

I wonder if there's a new batch of crack

making the rounds ????

---

That's too funny gcode

 

Rob

[Hardmill]

Part of the beauty of Mastercam posts are

the ability to customize them to fit you your

needs. You've stumbled upon a great well of

knowledge here. Its very likely you have one

thats already close.

 

PEACE

 

[ 09-25-2003, 01:19 PM: Message edited by: Hardmill ]

[Rekd™]

quote:

---

You've stumbled upon a great well of

knowledge here. Its very likely you have

---

You've stumbled upon a great well of

knowledge here. Its very likely you have ruined your chances of getting water from it...

 

These guys are starting to get on my nerves.

 

READ THE FAQ!!!

 

 

A better question would be, "How can I make my post do what I want it to do"

 

'Rekd teh Bonk! Bonk on the head!

 

[ 09-25-2003, 01:28 PM: Message edited by: Rekd ]

[Brendan P]

I'm not saying anything!

Everytime I get involved in one of these threads,it gets shut down!

 

Have fun boys........

[Keith Graydon]

look out below!

[Keith Graydon]

[Hardmill]

quote:

---

I'm not saying anything!

Everytime I get involved in one of these threads,it gets shut down!

 

Have fun boys........

---

+1 bucket

Did you notice my new attitude

 

PEACE

[fboike]

STEVEOL

I just finished editing that exact post.

it works perfectly. if you have problems with

yours have your reseller contact me or you can

start editing. but dont bitch about money everyone here has heard it way to much.

[Brendan P]

quote:

---

+1 bucket

Did you notice my new attitude

---

Yup....

Very proud a ya.....

[Philcott]

Hardmill,

 

I thought I noticed the old good mill, bad mill routine.

 

Phil

[Hardmill]

quote:

---

I thought I noticed the old good mill, bad mill routine.

---

What do you mean by that?

Have a nice day

This would be Cybil-mill

 

PEACE

[Hardmill]

BTW waht happened to steveol (starter of this thread).

Did one of you guys send him a post? I thought

we discussed this.

 

PEACE

 

[ 09-25-2003, 06:33 PM: Message edited by: Hardmill ]

[gcode]

I suspect he was a pirate who though there were a bunch of crackheads here. Little did he know he was in an official Mastercam forum full of people who think pirates suk

[cadcam]

Gcode I do not think that this man is a Crack case.

He works for a large company.

I think he should get a post ,I think he should talk with the dealer and see what that can do and take he's gripe to them.

You never know they just might give him one if you ask nice.

[Paul Decelles]

I know I would help him if he bothered to call me.

Don't know who wanted to charge him for the post, he definately hasn't contacted me to inquire as to the availablility of a post for this machine.

[crazy^millman]

Yeha I stayed completely away from it. I will keep my mouth shut from now on. I hope you get the help you are looking for oh nice kind sir of the profession.

 

Crazy Millman

[Brendan P]

quote:

---

Yeha I stayed completely away from it. I will keep my mouth shut from now on. I hope you get the help you are looking for oh nice kind sir of the profession.

---

Your a sick man crazy.

[Philcott]

hardmill,

 

quote:

---

What do you mean by that?

---

I was refering to the good cop, bad cop routines we see in evening dramas on tv. You were being the good cop and letting others be the bad cop.

 

Phil