We have too much work…

[kathy]

Anyone Interested? We are looking for someone (very hopefully local) who could contract for us in a short term – at least three months.

 

Most of the work is 2D, and family of parts type stuff. So there is a lot of copy n’ paste between programs, with the initial programming and parameters done. The hardest part is to be able to understand our internal standards (all in written format) and be detailed enough to output the program documentation to conform to those standards. Oh, and it has to run right the first time, but it really is pretty easy parts.

 

In case you’re wondering, I’m still trying to transition out of the bulk of the day to day programming so I can concentrate on design in Catia. Right now, I’m still handling about a 75% work load in Mastercam, which is way too much!

 

Kathy

[crazy^millman]

Kathy sorry we cant I am sending alot of my work out also. Wish we could be nice to do some 2d stuff and give my new programmer some stuff to cut his teeth on. I can give you some possible places, send me an email and I will send a few contacts I have made since being out here.

[mayday]

 

 

could you rephrase the name of your topic Kathy,

I have never been exposed to that terminology.

 

here they call it: I need you to work Saturday

 

anyhow Im not to local I guess

[chris m]

quote:

---

here they call it: I need you to work Saturday

---

... and Sunday ...

[wtsylvester]

Well I'm sitting at home due to lack of work.

and a little bit of snow.

 

But

I'm just a lowly worker bee "Know thyself"

 

You would have to talk to the boss. Also we are in NM near Albuquerque.

 

E- me if interested

 

Bill

[dareman]

Is the Portland Oregon area too far away? I could have my boss contact you and maybe take a look at helping you out.

 

[ 02-04-2004, 06:54 PM: Message edited by: dareman ]

[Hardmill]

How close is close?

Is L.A. too far?

 

PEACE

[Guest CNC Apps Guy 1]

[kathy]

James -

 

What does it mean?????

 

I'm up late - just finished my paper, and the brain is on hold. Did you get my email?

 

I will be putting a package together tommorow. Got one long edge member out before I left work, got the second one to do in the morning..

 

Kathy

[Guest CNC Apps Guy 1]

Me too, me too!

[Guest CNC Apps Guy 1]

I'm leaving for work right now so I'll get my mail when i get in.

 

Talk soon.

[Todd Mann from Fastech]

I would be interested in some work . I havbe been using mastercam since V7.0 with solids and multi surfacing.

[Rick McAllister]

Kathy,

Are you looking to sub out the job or just the programming?

[kathy]

Thanks you all who have responded…

 

Be patient guys – I’m putting together an information package, but at this point I really should bounce it off our HR department, (so I don’t get into trouble) before I turn it loose!

 

Rick - we are looking for a contract programmer only; the machining will all stay in house.

 

Kathy

[Code_Breaker]

Keep me in mind . . . busy now, but in a few weeks I am available.

 

I will e-mail you info . . .

 

Code_Breaker

[Rick McAllister]

Kathy,

Please include me when you get the package together. I would like to submit it to upper management.

[kkominiarek]

quote:

---

Please include me when you get the package together. I would like to submit it to upper management.

---

If it's not too late....I would like to be considered also.....

[kathy]

Jusy checking in again with this -

 

I have forwarded everything to HR, and I will be working closly with her to put this together!

 

Kathy