Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
so what do you find different on the colors in code Expert to Cimco? I am sure you know you can change the colors based on what codes just like CIMCO and you can change the fonts were they seem a little bolder in CIMCO but you can do the same in CE.
Folks please share with us what you want to see in Code Expert that help make that your default.
Thanks for all your input.
Ok, now finding out that the Swept was a wire path of 2D-swept were he is expecting 3D cuttercomp.
This was my reply:
OK, we show and option for Wear in the setting but in this case the tool path is to act like a standard surfacing path were we compensate for the Tangent of the tool rad . so the issues is you are expecting a compensation in multi-able directions based on the G41 asking to do a 3D comp and most machines cannot handle this. so if you review the path output you are not seeing the G41 as this is not a straight leaner comp 2D comp.
A the thought for getting Wear to work and why is there. if your machine supported 3D cutter comp then post modes would be needed to be made so the post would see this in the B-NCI.
I hope this helps.
\here is a question. beside Mastercam what other software you teach on these computer?
I teach at a locale college teaching Mastercam for going on my 18th year. we also teach Catia and solidworks and NC simulate on these computers that helps drive it to.
Glad you go it worked out. I hope you are getting a lot from these training videos. I agree that there was time I surely would of like to give more details.
We have seen issues were at time on a multi screen were certain tabs may not work correctly if undocked to another screen.
Have you downloaded the B5 2020 and tried it there with that file?
There is a an operation 4 that does what you want an edge chamfer. There are a few different samples of Axis sub cuts review the view sheets and operation. if you have question please ask.
Axis Sub.zip
So you have the HLE ( Home Learning Edition) Version being the what we give to students? then that is all you get as you cannot post anyways. but it will let you do 4th programming.
Matters if you are just wanting to finish and start from the center. Now if you need to plunge in the center and rough out for example and finish there is Circle Mill.
when you create a view sheet this is what it is looking at and the ones with the check marks are what is save. So set the part part on the screen how you want it and all other setting then save bookmark setting and now every time you select that tab it will set all the options and set the part how you want to view it.
Do think there is a call for an example video of a view sheet shown and setting them?
Mathhew, were are you located what state. Did you get this to work correctly. I am wondering if you select C before picking the circle if the geo would find the location. let me know if you need me to show you in a video of what I am talking about.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.