Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Thanks for sharing and so sorry about your Mother in law. This is really nice what your family is doing for her comfort. I can see this being hard. Our thoughts are with her and you and the family.
Yes laugh as much as you can makes for a better day and as you said situation. But have tried scratching and sniffing you never know. it could be the Wonka factory you lick it and it will taste like fruit . Take care buddy. will I see you at IMTS?
Ok I do see this here.
Using the Space Enterprise kit that includes the Cadmouse.
I tried it with MC 2019 and SW2018 along with SW 2019 both give the same issue.
Another thought going with JoshC, in 2018 using the solid chain linking most of the HST Surface paths will let you use the edges as a containment boundary that is not planner to the plane. Were a long time we could only use 2d flat planer geo to the plane you are in for containment.
I have used this in the past with good results. but the I also teach it as the school does not have this add on to do Morph to rough between the veins and do the hub then Swarf Mill.
if you have Multiaxis use Morph and set for 3axis with the lolipop. use the inner and out edges to to use as you from and to curves and the green faces as the drive surfaces.
Showing this to my students tonight in class.
I have a nethasp here and I have one Win10 64bit running V9. I am figuring the nethasp is on a network server somewhere? Did you go into the V9 Nethasp.ini file and put the IP for were the nethasp is under the TCHP settings?
Hey Mick you could asked me to move next time I have mode connections in my office.
PS Thanks Jimmy Wakeford helping out a TheeCircle member or is that really from one member to another.
I saw this mentioned on the Mastercam Forum. I have not seen except when we had the winows 10 1709 issues were everything was slow. I have no issue sense updating.
Sorry you are still having this issue wish I could be more help.
Ask your dealer for the machine install for 2018 and only install what you need. As reinstalling 2018 will not reload all the posts as 2018 only shipped with a bare minimumof machine defs compared to the past.
Hello all the FTP is back up temporarily on the old server till I can get up on the new server.
PS our search on the forum SUCKS big time. I cannot be-leave that I cannot type FTP as a topic and it finds nothing .
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.