Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
When i open a file it starts coming in fine then dissapears for a second or two right before it fully opens.This wasnt happening in X2sp1.
Shaded or unshaded,solids or surfaces doesnt seem to matter.Just wondering if anyone else sees this.
Quadro FX 3500
Eric when contouring on the roll cutter around corners selection in the contour parameters have "sharp" selected.We have problems with XY arcs if "all" is selected.
It happens to me when the geometry is on a level thats off and then when the contour or pocket selection window is up and you turn the level on it doesnt chain.
"so I manually tried to insert the folder into the new one and no settings changed"
-------------------------------------------------
I overwrote the config folder with the old one and it worked fine.
Yeah we ended up calling milltronics and they did have us change parameters in the control.So far so good.I wanted to give it awhile to make sure that did it,so here it goes.
Parameters-setup-misc.-scroll down a ways to software options-it will say g18___XZ[Change XZ to ZX]-and then a bit down special flags set to 002.
Like i said so far so good but I would test first before running parts.
We have the same issue as Millman here on our Milltronics as far as yz and xz planes.So we turned them off in filter also and that took care of it.Also contouring we have to use sharp on roll cutter aroud corners or sometimes it will go the wrong direction also.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.