Guy Arseneault
-
Posts
223 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Guy Arseneault
-
007, Could you let the rest of the forum know the outcome of your science project. I know I would be interested. Guy
-
Good Luck mold100 On your new venture
-
My NC code name default to original MC9 name
Guy Arseneault replied to razor's topic in Industrial Forum
Razor, When you "save some", this saves just geometry that you have selected and not the toolpaths to a new name. Then you have to do a "file,get" to open new file you've just saved and will have your new name when you go to post your toolpaths. HTH Guy [ 11-13-2002, 12:56 PM: Message edited by: Guy Arseneault ] -
Trevor, Awesome work. Guy
-
And they say you can't teach an old dog new tricks.
-
I agree with DosMan, whoever he is. Guy
-
We use mpfan.pst for dncing(sp). You can only do so much with the machine. Guy [ 11-05-2002, 07:12 AM: Message edited by: Guy Arseneault ]
-
Sucks to be you.
-
Christian, yes I have Sp1 installed. SVO and Glenn, thanks for your input. I will give it a try. Guy
-
I have a surface that I am using surface contour toolpath and it is gouging the part on one side and not on the other side. I have uploaded a file called G-3_trode.mc9. Any info is greatly appreciated. Guy
-
awesome Guy
-
Hi Chad, I agree with Mold100 and Tony. We use a vacuum system on our grinders and shop vacs at the milling machines. We also have a Bostomatic for high feed and high speed milling of graphite only. We use Graphel 3800 series mostly. Have plenty of soap around to wash hands, it is very dirty and messy shi*. Guy
-
I found when I change posts from one drawing to another, I get the error message mp.dll not found, so then I close MC and restart it. So does anybody save their nci files at all? Guy [ 09-20-2002, 02:17 PM: Message edited by: Guy Arseneault ]
-
Congrats, I also am a 2nd time father. A big boy named Nevin born on 7-24-02, 9lbs. 12 oz. Guy
-
CADCAM has a thread looking for a MC user. Check it out. http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=003857 Guy
-
this one is 4-sale
-
Hi everybody, Does anybody have a Sodick A3C-R plunge edm with a Sodick Mark VII control in there shop? Guy
-
go to 1)screen 2)config 3)nc settings 4)sequence numbers hope this answers your ? Guy
-
v9 surface finish contour problem
Guy Arseneault replied to Guy Arseneault's topic in Industrial Forum
Thanks CadCam, you're the man. -
thanks for sharing.downloaded fine. wished my 3 year old would.lol
-
Hi forum members, I can't seem to sfc the outside of my trode.It wants to machine the inside instead of the outside.I have uploaded the file called trode problem.zip to the ftp site in the mc9_files folder. Have updated to latest patches(07-01-02) Thanks for any input, Guy [ 08-16-2002, 01:04 PM: Message edited by: Guy Arseneault ]
-
Well said, James.
-
what do the #'s in parentesis(sp)mean? Guy
-
When downloading the file and exploding it, the files that are being replaced, are they overwritten or just the info added on to it. I don't want to lose my mill9.cfg Thanks Guy
-
PRETTY COOL COASTER