Odin
-
Posts
147 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Odin
-
So when is the X4 MU1 supposed to be released?
-
No problems here either! and its on vista.
-
hold shift down and select the ones you want or hold the ctrl key down...
-
We use Mitsubishi thru coolant carbide drills with thru coolant. they work pretty good. http://www.mitsubishicarbide.com/mmc/en/wh...2008_1/mws.html
-
I would definetly go with the Makino S56... fast and reliable.
-
What version of Mastercam are you using? if you are using X4 try copy and paste the machine def and the control files anto the X4 cnc_machine folder.
-
Try using true type old english font it worked for me when i tried it out...
-
try ph horn www.hornusa.com or chris larimore at 1-317-409-2309 hes the rep over here in indianapolis he can help ya out!
-
USe a containment and pick the geometry you want milled and the surrounding geometry as drive surfaces...
-
Look into GARR die sinkers- www.garrtool.com/pdf/catalog_09.pdf Page 111...we use diameters .031" to .500" , from engraving to profiling roughing amd finishing of hardened h-13 on a makino mcb 1210 machining center and a makino s56 vert mill. Also look into the Iscar Multi-Master tooling. they have interchangebale tips with carbide shanks...
-
ok thanks ill give that a try
-
it actually says unknown file type...
-
Yeah it keeps sayin that the post update file cnnot be found when i click on it. i just upgraded from x3 to x4 this morning. adn it didnt migrate c-ooks from x3 to x4.
-
Where can you download the c-hooks for x4?
-
2- xfx GeForce 8500 gt 512mb in sli, with 4 gb ram, vista ultimate 64 bit.... runs great
-
Mitsubishi carbide drills work real well in hardened materials.
-
Whitney Tool is about a block down the road from where I work (Bedford Machine and Tool)... They Have some pretty good cutters.
-
Go...WCS... Go!!! Bestes Friend!!
-
Is block skip turned off on the machine? ours was doing that and we turned block skip on.... it doesnt return to home position after every op now.
-
X-X3 all have the option of editing tool. just highlight the tool in the tool pane that u are wanting to edit, right click ,and hit edit tool!
-
TRy looking at GARR mills. They make a wide variety of flat, bull, and ball e-mills. www.garrtool.com We use them for aluminum, H-13, copper brass, lexan and alot other stock.
-
Try also, www.tipsformanufacturing.com we purchased the 3 disc set for x-x2... they also have the training discs for X3.. reasonably priced.
