Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
In the backplot .. you can save as geometry ...then save it to whatever level you would like (little save diskette icon)... then delete the "rapid" moves
Hope this helps
Mic is right on... it positions at the first xy location but will not drill that hole until the second (same) xy location is called up during the cycle
EX:
22 TOOL CALL 6 Z S0
23 L X-1.8556 Y+0 F MAX M5 (Move location)
24 L Z+1.5 F MAX
25 CYCL DEF 200 DRILLING ~
Q200=+0.5 ;SET-UP CLEARANCE ~
Q201=-1.5 ;DEPTH ~
Q206=0 ;FEED RATE FOR PLUNGING ~
Q202=+0.1 ;PLUNGING DEPTH ~
Q210=+0.1 ;DWELL TIME AT TOP ~
Q203=+1 ;SURFACE COORDINATE ~
Q204=+0.5 ;2ND SET-UP CLEARANCE ~
Q211=+0 ;DWELL TIME AT DEPTH
26 L X-1.8556 Y+0 F MAX M99 (Call up drill location)
Mick:
I have written several for water jet / laser cutters....
Usually I get sample programs from the machine that ran... then I start to build a specific post from the information supplied...
I also ask for a manual if they have one
Hope this helps
SpecV;
I had the same problem.. I actually had to change my hardware acceleration from "X3" to "x4".... I wouldn't have believed it if it wasn't my own system
Peter:
I had customers call with that.. I had them change the hardware acceleration back to "one click above none"... there now is no delay in "X4" with this
I also had mine on full in "X3".. but had to change mine to this new setting in "X4".. no delay time...
Hope this helps...
Yes but this is an American product... Since Mastercam is written in I believe 30+ languages, there are "scripts" that can be modified to ouput as need be but that is up to the internation (dealers) to re-format the script fields
Murray;
If this is a fanuc post (default), misc integer 10 is the conversion... however you mentioned only misc integer 1 and 3 are active .. so I am not sure
What post are you using / machine ?
Jay:
Its for kids wanting to prep for the football season ahead... Last year was the 1st time we've gone.. it was incredible ..
Here is the website ...
www.jimkellyfootballcamp.com
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.