Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
the upgrade to the cimco editor does have 'scaling', along with tool path backplot. you can contact your MC dealer or buy it direct from cimco.
www.cimco-integration.com
i would use the cimco editor. it comes free with your mastercam and works much better then the mc communicate. i haven't used the mc communicate since v7. you can set the default editor and communication in mc. goto 'screen-configure-start/exit' and set the editor and communications to CIMCO.
roger,
are you saying that 4 is your longest tool in this example and you would like the post to find the longest tool in the model and use that number?
more than likely the problem is in your post. did you try the mpmaster.pst or the mpfan.pst that ships with v9? they both use the workofs variable to drive the G54 offsets.
when doing rotary work and creating tplanes/cplanes with the cplane rotate, you want to hit the alt-F9 shortcut key to check that the X-axis is running the correct direction.
Hi Mark,
I'm not sure what company you are from, but we can handle any Mastercam issues, support or services you need. We are located in Sterling, MA, which is just north of Worcester. Give us a call sometime.
i found a ascii-decimal chart on the cisco web site:
http://www.cisco.com/univercd/cc/td/doc/pr.../rpc_r/4452.pdf
[ 04-01-2002, 10:55 PM: Message edited by: steveb ]
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.