Kannon
-
Posts
1,606 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Kannon
-
Rick... Try this... under your .25 dia.. finishing parameters... down under finish check mark the "start finish pass at closest entity.. then under your pocketing parameters... change it from roll cutter around corners to NONE instead of SHARP.. I think thats what you want.
-
Thanks JP... That did the trick.
-
I am having trouble with transform rotate... I am using X3 and I am basically cutting a groove in a dial, then transform rotating it a number of times for the correct spacing. Problem I am having is I want to use the same offset.. no matter what I choose in the "work offset numbering" it increments the offsets in the code. ANY of the selections does this. I just want the offset in the beginning and then from there on... just A rotations... The paths look good, A commands are there.. but now I get G54, G55, G56. any help would be appreciated. I using the GENERIC HAAS 4AXIS VMC post.
-
A quick and hopefully not to lame of a question
Kannon replied to bassn_07's topic in Industrial Forum
quote: What's CMM? CMM -
quote: What's up with THAT??? wrong plane?
-
dont forget those X3 users to update your siggys.. I would have put it in Thads sticky but for some reason its locked. how bout a X3 icon
-
Post for AGIE - GEO + JOB files
Kannon replied to Alvaro Gil - Cimquest-inc.com's topic in Industrial Forum
good point Thad... what are we gonna do with the ones who want to give their posts away -
-
should be in the PHEADER section and the PEOF section..
-
I think I am going this year to the IMTS show..
-
me bad... look under your help for NORMAL and it explains it nicely. I was looking under the surface options..
-
quote: check the surface normals, I had to reverse them to be correct. I also would like to understand this a little more clearly... I know I can use this.. how can I check and reverse surface normals?
-
Got it workin thanks..
-
I downloaded it but it said it couldnt install after the reboot..
-
how bout under your the settings tab....click on configuration.. then down on the bottom change your current default to metric. you will have to regen your toolpaths..
-
glad its working.. as gcode mentioned... Tell your IT people you need Admin rights to the entire mcamx folder.
-
Anyone?
-
any access to the ftp?
-
how bout if you copy all the info off the .txt doc and do a file new... paste it... then save it then rename that extention to the config.
-
can you copy your config file, paste it on your desktop and rename it, with a .TXT extention.. then open it and alter it, save it as a .txt then rename it changing the .txt to .config and put that in your config folder and select it for your default in Mastercam? just trying to figure a way around it..
-
maybe Webby can pick a member for a shirt!
-
quote: Maybe you should get on that WII fit everynight then I do.. but then it makes me thirsty and I drink a case.
-
The ones I got everytime I got a 1000 posts are starting to get snug...
-
maybe we need a where are they today thread.
-
quote: having posted over 10 messages.