This it? code: cool_zmove : yes$ #Coolant off with last move # General Output Settings # -------------------------------------------------------------------------- hel_2100 : no$ #Acramatic 2100 style helical moves, 0=no, 1=yes force_dpts : no$ #Force XY output on all drilling lines including cycle call? haas : 0 #Haas style peck drill and extended offsets, 0=no, 1=yes wcstype : 2 #0 = G92 at start, 1 = G92 at toolchanges, 2 = G54, 3 = Off force_wcs : yes$ #Force WCS output at every toolchange? tool_table : 1 #Tool table, 0=no, 1=yes, 2=Predator VCNC, 3=MetaCut View output_z : yes$ #Output Z Min and Z Max values (yes or no) cool_zmove : yes$ #Coolant off with last move

you guys have many variable programs? I dont think the Agie is familiar with it..

great information guys.... Our guys are just now working with the wire library for the mits... they always added the offsets at the machine... Nice talking with you Brad... your insite has been greatly appreciated. I didnt get a chance to give ya a ring the other day. Its been crazy at work.

in Mastercam hold down ALT V then click on Hasp and it will tell you what you got.

check this out... you need level 2 module to do surfaces.

thank you

We are looking at a Makino Wire E.D.M. is there a post that supports them? Or what post should I be looking at getting for them. Pros and Cons WIRE EDM Makino SP43 vs. Agie Progress V2 anyone have any experiences they could share with these machines.

mail.. see if its anything useful

quote: Could someone have renamed it for a different machine yes..

I cant find the MD just the post and CD for the Generic Fanuc 3X

Tyler.. hows that ignore function coming..

edit..missed your reply.. if you got something in mind I might have a graphic to help ya out.

Heavy.. got something in mind? Maybe load it to the ftp and we can help ya.

in your peck parameters put in a 1000

I got it..

I am scratchin my head on this one... when I turn on the options for wire, power, fill tank and turn my flushing on it is giving me the code in the post of a M81... I need M80 which is WATER ON.. any help would be appreciated.

post out your operation and check the Mcx file descriptor tab when the post processor screen is up and go into properties and put in whatever you like... then save your file.. see if that does it.

Oppiz, We are using the Mits FA series 4 axis wire to run our FA10, SX10 and FX10... ask your reseller about it. He should be able to set you up.. we are using X3 and basically abandoned our older posts.

being videos are being discussed.. care to share a video of what you are doing for your "unbirthday"?

I backed out after I seen it was going to accept it. it was on the collapse when I ESC I will see how long it takes.. but me say.. loonnng time

Bruce... it works for me if I change the total tolerance on the finish scallop parameters page to .001 instead of .0001

hmm.. not seeing on the ftp.

I was planning on going... now dont know if they will let me go..

quote: Since plunge paths are usually rough only. Ive copied the drive surf on the bottom and rotated it 1 deg so the tool never hits bottom as its working its way in the pocket. good idea..

quote: As always, I appreciate your help. best forum around.. isnt it NeilJ