How do I... Make my machine group 1 My Mill when I open X? (Instead of Machine group 1 Generic Mill )? Thanks Tony

How do I get a Version X post into X? All my 9's were a snap. (I tried to run postupdate and hope it would overwrite it but it errors out) Thank you Tony

Here Goes Nothing.... Could someone send me a copy of a "MPFAN-MAKINO-SGI.PST" ? Or what ever your using for a Makino S56 My resellers "Free" post won't Helix and I need that for entry moves. Thanks Tony I'll trade you a custom Animated Avatar !

DOH!

Its gone,MC's can edit everything now.

Put a copy ,or if its a True Type font install it in MC's Font folder MC can't find it in MS's font folder. It can be done And Welcome to the Forum

Thats fine the reamer needs something to cut

I'm oldschool too Oil, Low rpm, 3.0/5.0 ipm , 0 spindle load... Feed on the way out Not Rapid like G81

Hey thanks Larry , I am going to do just that!

I should have put "In my humble opinion" on the screen size... Your operations are about the same size as,and too the left (like SW's History tree)now. maybe 3/4 of your screen is left for your Geo. Burning "The Wall" as I speak...

You can change the size of the Icons ... Also Drop your 15" monitors off at salvation army box, You will need a 17" minimum for X.

Good stuff thanks, Were "In Bed" with the Makino saleguy too. The okuma guy says the "S" in the makino S series means its mfg. in Singapore. With a Row of Hurcos here She'll fit right in I am not sure where the E series is from. Thanks again Tony

3D geo ,Carbon and Hardmilling S7

Hey everyone Are Tree machine (Which built this place) is Heading for retirement We are comparing these machines Fanuc Robodrill Okuma Millac 44v Makino E33 Roku-Roku Any thoughts or experiences? Thanks Tony

Tom Everything I have ever used in my Dirtbikes and Snowmobiles are Forged... BUT, I like the way you question WHY, and think outside the Box.

Bill If your lugging it around like myself You might want the total replacement warranty for $200.00.My 15" Toshiba Was stepped on and the screen is $400 alone.

"Vaporware" Dude, I have been cutting Molds all day with it....

Hey Ron, Welcome Back! . . . (End of Hijacking)

.bmp would be fine I will email you my Home Email address. we can take it from there. Tony

I could do it as a .GIF file You couldnt stop it anywhere you wanted to though you set the time each frame hangs there and then save the whole thing. What I would need is a picture of each sequence of your assembely as it functions. Basically the same as Mikes idea but anyone anywhere could view it. I would do it for free. Tony

He says: 1) He has them whats your time frame? 2)There nothing more then a military connector Available from Newark Electronics (Search online)and use your milspec # from your manual. 3)Order it from Hurco there a couple of hours from you 4)Hey who is this guy,whats his problem. 5)I got to go,I am at a drive through.... HTH

I can Call "My guys" cell and ask him. He wheels and deals....let me know

After you save as copy "Core" etc. you have to go back and open "Core" Get used to that. Otherwise you will start Editing whats in front of you and Red !'s start killing your .ASSM and you won't know what happened!

My Process: Open new Size block save as size block Open new Split mold Assembly Save as Split mold Asmprt Drag and drop Size block onto origin of Split mold Asmprt Open Part Drop part into Split mold asmprt (Not unto Orgin) Mate part to planes of the assembly. Edit / Size block part, Cavity out part on Moldbase origin (Always every cavity process)SAVE Open new split block save as split block Select Insert part then select Size block part (must save as split block) (Drop into Split mold Assembely on Origin) Open split block part from split mold Assembely Save As Copy as Insert 1,Pin 1,Slide 1,Cav,Core etc. Drag into Assm and edit Split block / Cavity out with it Save and close Split block part Tony

+1 on the Fuzzy Logic technology Those arent the Machines that make the "Frying a Chicken" sound when your pulling 15+ amps @.010 P/S, straight down no peck.