Custom Right Click Menu Chook

[Rekd™]

So I'm chopped liver, eh Jay?

 

Where's the love now?

[cadcam]

Ok reked you want me to bring my trucks over and play? I have a few monster trucks.

[cadcam]

Thanks Ron,Got your mail will call for sure.i will see if I get by.

[Guest CNC Apps Guy 1]

quote:

---

...am using v9.0 with updates & Win 2000...

---

No, that won't get the job done. You need to look at the first post in the topic for system requirements.

[crazy^millman]

Jay, Matt is not very far from my work maybe we could all go grab a bit to eat or something one night you are here. If you guys want to make the treck to my house I do owe you guys maybe some beers and steaks off the grill on me . Shoot James could ride down and Jerry is not very far.

 

My daughter would love kids to play with.

[J Coulston]

Has anyone running a Logitech mouse had success executing this chook?

 

quote:

---

We have a winner! My program doesn't like the Logitech mouse

---

Thanks

[Guest CNC Apps Guy 1]

Hey, sounds good to me. Just a hop and a skip down the 15.

 

{quote]...My daughter would love kids to play with... My kids love to play with other kids too..

[romer]

quote:

---

I was wondering if they can be assinged mastercam functions, like main menu, or backup.

---

Somename75,

 

The Explorer Intellimouse I have can be programmed to enable program specific functions for all the buttons. Just program the desired Mastercam hotkey for the particular button.

 

Go to your mouse settings and check it out. You need ver4.0 or higher mouse software you can get at Microsoft's website.

 

romer

[romer]

quote:

---

Few things of note:

This has only been tested on mc9.1sp2 and windows XP. I was forced upgraded to both a while back and no longer have access to mc8.1.1 or windows 98.

---

Bryan,

Just to pass info along, I have tried this on both 8.1.1 and 9.1 running on W98. The menu appears fine, but the functions are grayed out and don't respond. Works fine on W2k.

 

Thank you very much for a great little utility.

 

romer

[Rob B]

I tried to get the c-hook to work but didn't have any luck. I have removed the files that were installed in the c-hook folder. Now when I am in MC, and going from one file to another I get a mesage: Library not found(MCAM9DEFAULT.DF9). I know it changed my config file, but I just don't see what changed.

 

Any Ideas???

[Rob B]

Ignore prev. post, I got it fixed. Sometimes I'm not as dumb as I think I am.

[t smith]

No luck with logitech mouse

[Guest CNC Apps Guy 1]

My home PC uses a Logitec Mouse and Keyboard(wireless) but I did not install the Logitec Software. Why mess with it if it works I say??

 

WindowsXP Pro SP1

[bryan314]

I have a test chook for Logitec out to Code_Breaker. If anyone else using a Logitech mouse is having problems and you would like to try the test chook please email me at my ivanxxxx email address before noon (eastern) today.

 

Bryan

[pno]

Jay ...cadcam I do not want to upset you

However, you are many Jays on the forum

[Code_Breaker]

Bryan,

 

Concerning the Logitech files, I have a few things to say . . .

 

and . . .

 

Thanks, now I can play

 

Is there anything else you want me to do with this? I will go back a re-read this post later today.

 

Code_Breaker

[bryan314]

I'm getting positive results from the Logitec people. I'll try to get another release out in a day or two.

 

Bryan

[J Coulston]

Bryan,

Thats great, thanks for all your hard work. I really appreciate it.

 

Thank You,

[bryan314]

Ok stick a fork in me I'm done. This will be the last update for a long time. My tempory reprieve from another project is over. I'll be working on that for the near future.

 

Updated file:

http://www.ivanxxxx.com/mmouse_20040607.zip

 

Changes:

1) Now works with Logitech Mice (my bad) (thanks Code_Breaker and others)

2) Menu Limit of 500 items is removed. Sort of. I've re-coded the memory for the menu items. In theory they are limited only by your systems memory. In practice, I've limited them to approximately 3000 items. If you need more than 3000 items you need to get a life.

 

Also of note, the Setview (Name Plane) module has a limit of 100 items. If you need more, see previous comment.

 

Thanks everybody for the help and positive comments.

 

Bryan

[Rekd™]

Thanks Bryan. Is there still a time bomb??

[bryan314]

ye$ End of July.

 

Bryan

[J Coulston]

Yeah, works here with the Logitec.

 

Bryan, Thanks for the great chook.

[bryan314]

Rekd,

 

Check your email.

 

 

Bryan

[Rekd™]

W00t!

 

Looks Good. I'll let you know how it works out.

 

Thanks!

[HEAVY METAL]

I'm using ver 9.1 and I'm getting the error mp.dll not found when I have this c-hook running and try to post a program. Does it work with 9.1 or do I have to have 9.1sp2

 

Thanks HEavy