x4 and x5 test what version fast

[thanhsonnguyen]

anyone run 3d toolpart surface finish flowline or finish pencil yet how fast you computer .. it takes me over 15 min to done that tool , my x4 faster than x5 ... ? or my comp some think wrong?

[Colin Gilchrist]

You need to contact your reseller for support.

[gcode]

Maybe you're running the wrong version

Go to Help/About

What is your build number

(Upper left corner)

MastercamX5 (14.?????)

[thanhsonnguyen]

i'm open x5.. all icon it new from x5 , x4 don't have dymanic coremill and dymanic contour, lets me check when i'm go to work

[Gary]

yesum good idea

[thanhsonnguyen]

i'm try ancomputer that toolpath it slow than x4 ,version 14.0.4.33 is it x5????,one more think Toolpath Refinement, i'm lick it off pape showup, now can't openfilter, do you know how turn it back on thanks very much

 

 

[SKIR68]

wow

[Hardmill]

wow

 

 

lol :lol:

 

 

 

 

 

 

 

 

 

PEACE

[#Rekd™]

Supercar 2006,

 

Who is your Mastercam re-seller?

[thanhsonnguyen]

cad-cam

[#Rekd™]

Where are you located?

[thanhsonnguyen]

if you know cad-cam , you will know my location. if you want to know more about me , you shuold keep me a # you sister i will tell you lol

[Colin Gilchrist]

Don't take this the wrong way, but your posts in all these threads are very hard to read. It would help a lot if you would write in complete sentences.

 

I've seen 4 threads from you recently, and I wasn't able to offer any advice on any of your problems, only because it is very hard to understand what you are asking.

 

This is why I suggested that you get help from your reseller.

 

I'm honestly trying to help you.

[thanhsonnguyen]

thanks colin i'm understand that

[Trevor Bailey]

another reason we need the "location" on by default.

[Guest CNC Apps Guy 1]

IIRC he's from NorCal. Sierra CADCam is the reseller there.

[thanhsonnguyen]

yes i from northcal.., some threads i'm ready fix that colin...., anyway thanks very much guy help me learn more......

[shazam/TPP]

i'm try ancomputer that toolpath it slow than x4 ,version 14.0.4.33 is it x5????,one more think Toolpath Refinement, i'm lick it off pape showup, now can't openfilter, do you know how turn it back on thanks very much

 

for the arc filter try this

go into start/all programs/Mastercam x5/mcamx control panel applet, then to toolpath support, new arc filter turn on to enabled.

 

hth

[Colin Gilchrist]

You are welcome Supercar. We really are here to help. The more information you can give us about your problem, the easier it is to figure out what kind of answers you need. Thanks for understanding.

[thanhsonnguyen]

it on shazam , maybe part big 10 in? anyway thanks all

[thanhsonnguyen]

what do you set in control panel /mastercam/toolpath support/ hmm kernel arc ? is this changer make slow on toolpath( mypart when makes run 3d tool hmm:trimming passes to stock model....% slow) takes over 30 min done a tool