Hi Paul, I have the same with bullmills, set on tip and no tip comp. Only the backplot is wrong, the NC-file is correct Henk V9.1SP1 Mill 3

Mayday, Set your values in the parameterscreen incremental, I think that gives what you want.

Hi Kevin "Screen - statistics" gives you the number of visibel entities In the Level Manager you find the number of all entities. (including the blanked ones)

From UG i work with parasolid for conversion, works just fine, no problems.

I like it to and it works fine here There are diferent versions for V9SP1 and V9.1 check your version

Dick, In V9.0 parasolid V13.2 and older, and with a down loadable C-hook V14 In V9.1 parasolid V14.1 [ 04-25-2003, 08:02 AM: Message edited by: Henk ]

Eric, I know HASCO has some special tools for o-rings i dont know if HASCO has resellers in the US look at www.hasco.com

G Caputo, When I use the Cutter Compensation, I always use the Lead in/out: Line Perpendicular and length > tool radius. Arc: rad > tool radius HTH

Gefeliciteerd!!! (congratulations) [ 03-24-2003, 01:21 PM: Message edited by: Henk ]

I'm in love with Mastercam from 4.?, the last DOS-version, till now V9SP1. And waiting for V9.1

Andreas, I also downloadded the "separated buttons", Great! Zoom works, but the dynamic- and panfunctions not V9.0SP1 Win2000 Prof./Logitech cordless the "gvdymic" works good, so i do'nt think it's an video problem After an shutdown and a newstart the problems are gone, and the dynamic wheelzoom works Great!! [ 02-25-2003, 05:27 AM: Message edited by: Henk ]

Look in the Forum FAQ and there you find: Q. Does anyone have a post for a [insert machine or control name here]? A. Ask this question as your first message here and you won't necessary like the responses you receive. Look to your reseller to supply you with the proper post for your machine, or quote for the work that needs to be done. If you have something and are looking for improvements, it's a reasonable request. Maybe tell us why the post you have needs improvement. Perhaps try to participate a bit on the Forum before you go asking for something. Not unlike Habitat for Humanity, we value Sweat Equity here. Quid pro quo, Clarice. You may also want to let everyone know your company name so that your Hotmail or Yahoo email account doesn't give everyone the impression that you aren't a licensed Mastercam user.

Search in the .pst file for: sextnc .NC and remove "NC"

I have the same since I added the tooltimes in my doc-file. So in my opinion the doc-post is calculating the time.

Really nobody use this Card?

Glenn, G10 G90 L2 P1 X100. Y100. Z100.(G54) L2 = WCS (L1 = Tool offsets) P1-P6 = G54 - G59 HTH

Jack, Sorry to hear about your father and I wish you the best for Thursday morning. Be proud of him (and the other Vet's). Thanks for the welcome, I'm rather new here on the board, I work with MC from V4.2

Any one use the Matrox Pharelia (128MB) with mastercam? I used the "search" and only found things like: looks great, and so on. I'm interested how it really runs. So I can switsh from my ATI [ 02-13-2003, 05:05 AM: Message edited by: Henk ]

For me the homepages gives an indication how serious some one is. When it dont like me I simply clck it away, but I still have an impression. I didn't see anymore from "TheOldMan" !? BTW our homepage is only an startup version and not yet in English. So I didn't put it on the board. Sorry for my bad English.

Hi thad, Some times I got "cannot delete nci section" when I regenerated an operation. I dont remember what type operation. I saved the MC9-file, then opened that file again and regenerated the operation with no problems. What happened and why, I dont know. I just looked in the "commontemp"-dir and found 15 MC9-files sorry I cant help, i only got the same

Surface and Machinemasterg, quote: the box "use tools step, peck, coolant I named this the "toolprm", and that was checked. CADCAM, I checked the jobsetup, switched the "use tools step, peck, coolant" on, and that works! You all thanks for help

where can I find tihs box

When I get operations from library, the drill-ops allways come with coolant-off. The original operation and in the toolprm is coolant-flood, the mill-ops come with the correct coolant. Is there a way to get the right coolant? V9.0 SP1 Mill 3

Hi As Claus said, .H is standard heidenhain extension. Maybe there is some wrong in the program head, Check between "good" en "bad" files. For communication with our Deckels we use "TNCremoNT", avaidable on the Download Area at heidenhain.com

Hi, Try "File, Converters, Next menu, CADL "