Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi!
I trying to run Vericut6.03 under MX2 interface.
but mastecam crashing as far I hitting apply button on vericut dialog box .
Anyone familiar with this problem?
Hi
I went at work today, spent my time and check everything I can.
RTC on my particular machine (TOYODA) work absolutely same for all presented above ways .
It mean I can program M29 by all presented ways or change parameters .
I really thanks to everybody for the help.
Hi
Thank you very match for everybody.
Machine we just got- TOYODA with Fanuc 18i control.
m602- this is the subprogram to call particular precision mode.
Visual it taping fine, no alarms, no tap breaks so far too .
Alvaro can you clarify this phrase :
“ The spindle will start by itself. It will actually run faster because it will come to a stop before it starts the tapping cycle if you turn it on at the beginning.”
What do you mean when you say “spindle will run faster”?
I don't have match experience on Fanuc controls(i am Okumas guy),so I have so many questions.
.
Hi
Please FANUC gurus help me to understand taping cycle here.
This is the part of my code :
I am trying to use RIGID mode .,
Is this going to work or it necessary to put M29 and S in same line(like in manual)?
G00 G17 G20 G40 G80 G90
T16 M06 (M6 TAPRH)
(MAX - Z.5)
(MIN - Z-2.7)
G00 G90 X0. Y-1.378 S200 M03
G43 H16 Z.5 M08
M602
G05 P10000 (HPCC-ON)
G05 P0 (HPCC-OFF)
M29
G95
G98 G84 Z-2.7 R-1.76 F.0394
G80 M09
G94
M05
G05 P0 (HPCC-OFF)
G91 G0 G28 Z0.
G28 X0. Y0.
G90
M30
And what happened if I not put M29 here?
Thank you in advance
Hi James ,
I kind of new in fanuc control, most of controls i use to run was ok with R output.
But we got new machine with Fanuc 18i , and looks like problem came out.
Hi !
Is Fanuc mill 18i support arc over 180 deg and how you program. this arcs ? Using “-R” ?
And how you set your post for this control : You using I,J and K or R for circular interpolation ?
Regards
Hi,
After last updating mpmaster for x2 I can’t pull out my XY value to my comments .
Here is part of my post:
pstock # Comment amount of stock to leave
spaces$=0
if (opcode$=13 | opcode$=14),
[
n$, pspc, scomm_str, "TOOLPATH - ", *stoper, scomm_end, e$
if tool_op$ = 132,
[
n$, pspc, scomm_str, "STOCK LEFT ON WALLS = ", *stock_walls, scomm_end, e$
n$, pspc, scomm_str, "STOCK LEFT ON FLOORS = ", *stock_floors, scomm_end, e$
]
else,
[
n$, pspc, scomm_str, "STOCK LEFT ON DRIVE SURFS = ", *stock, scomm_end, e$
if check<>0, n$, pspc, scomm_str, "STOCK LEFT ON CHECK SURFS = ", *check, scomm_end, e$
]
spaces$=0
if (opcode$=2 | opcode$=4),
[
pbld, n$, pspc, "(STOCK LEFT ON X&Y = ", *xy_stock, ")", e$
pbld, n$, pspc, "(STOCK LEFT ON Z = ", *z_stock, ")", e$
]
spaces$=sav_spc
I don’t don’t speaking about values of XY , i can’t get massage “STOCK LEFT ON X&Y,’ So I realize that string “ if (opcode$=2 | opcode$=4),” doesn’t work .
So probably somebody who modif. Post change value of opcodes for 2d path,
But I can’t find anything about it.
Thank you in advance
Ok Paul,
This code (from mpmaster) is wrong because:
1 . I and J this is rad – vector , so it basically showing what rad . of arc and where is the center of arc .
If you have “I” and “J “ =0 and “XY” same for start and finish points Control will miss this information and give you alarm or just plunge down (depend control) if you have Z_- when you doing helix .
Here is example of programming of full circle:
G01 Z0. F15.
X-1.6734 F20.
G03 X-1.7109 Y.9989 R.0375
I.6791 J0.
X-1.6734 Y.9614 R.0375
G01 X-1.6546
Z.1 F90.
G0 Z.25
You can see : J0 But I – rad of arc (it depend where you start(end )point is)
Regards
Paul,
I do wont I and J in full circle and rad on arcs , like it was on my old v9 okuma post wich i created from mp master (ex. MP 9.x) . This post still work correctly with MCx2 , but i working on new Mpmaster for X2(ex. Mp 11) to create new okuma post.
Here is the sample of output i wont to get :
G03 X-11.8125 Y.7625 R.01
Z-1.05 I.3125 J0.
Z-1.1 I.3125 J0.
......
Regards
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.