Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I keep hearing mention of this priority setting...
so I looked for it again in task manager, this time I found the setting by right clicking on mastercam under processes page , and found priority listed
I went ahead and set it to high, idk if that will make life better, but i hope so. thanks Corry.
2018 worked fine enough, wonder what they did this time? thanks CNC,,, u never know what will quit on u.
it's not like it matters a lot. Just an irritation like so many others in Master Cam...
Somehow the feed time is way out on back plot. MC. 2019
My prog. runs in 26 minutes on the machine but backplot says it will be 1hour and 6min. !
it's all in the feed only 1 min. of rapid. anyone else see this?
i use a great time saver on my vise. I leave g54 set at the top left corner of the solid jaw and use the extension field for general setups.
there by eliminating the need for edge finding... I measure down to the jaw for my "Z" value , use a step block for "X" and fine tune "y" for how tight the part is held...
we work within .002" so it's good enough. of course tool libraries are a must. I like to start a new library named for the material that the tools are set up for. Whenever I set up a new tool, I try to remember to save it. u right click the tool or double click it and set it up there instead of using the parameter page. then u have to right click again to save to liberary .
is that related to the straight line that I would need to use to be able to put wear comp on my stuff?
I was told that is why my circle mill wouldn't take wear comp the other day. does it need to be 50% D as well?
What I ended up doing was to stick a g91 in ahead of my A360. and a G90 in the next line. it worked well.
I think my machine is set up to take the shortest way to the next A value.
by looking at these codes I suspect they will produce the same non turning result.
I will see next time I have the fourth running. Thank you for your time Jason and Heavy Chevy
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.