MR1 Release?

[ILv2Rk]

Well it is 12/15/05 and no MR1 yet!

I thought it was schedualed to come out by the middle of the month.

 

Has anyone heard anything?

 

I'm ready for some of my problems to be fixed.

[beej]

I know what your saying Jeff, But I think I'd almost rather see them be a month or two late if that's what it takes to be bug free.

[FLIPPER™]

True! NO MORE BUGS! Lets have a clean update. It will be worth the wait.

[N3526J]

Tap-tap....there's no place like home there's no place like home there's no place like home there's no place like home there's no place like home there's no place like home there's no place like home there's no place like home there's no place like home there's no place like home there's no place like home there's no place like home

[Storkman]

quote:

---

Well it is 12/15/05 and no MR1 yet!

 

I thought it was schedualed to come out by the middle of the month.

---

Middle of the month isn't till noon tomorrow. 15.5 days. Of course it depends on what timezone your in.

 

 

 

quote:

---

I'd almost rather see them be a month or two late if that's what it takes to be bug free.

---

Bug-free???

 

You have to be kidding.

 

[ILv2Rk]

I heard it was being released with a complimentary can of "Raid" to "Kill those BUGS Dead"!!!!!

[beej]

quote:

---

Bug-free???

 

You have to be kidding.

---

Hey I was just trying to stay on Cnc software's good side.......in case.... there's.. bugs

[Tim Simmermon]

I got an email from my reseller saying it was coming out right after Christmas. Not the news you were looking for, but now you know.

[Mike Mattera - TFM]

You all wanted a Christmas present anyway didn't you?

 

Mike Mattera

[Thad]

I think they're still working on SP1 for that survey.

 

Thad

[Jayson Kramer]

I think before X-mas

[Guest]

MR1 is vaporware

 

[thoskins]

One of the guys here went to a high speed machining seminar setup by our reseller and he told him it wouldn't be until after ther first of the year before we saw MR1.

[Storkman]

If you have been good lil boys and girls they might give you a Christmas present. If not,...... maybe June.

[Lathe-Mill]

haven't you guys learn?

is like predicting the weather.....

[Ken Erman from CNC Software Inc.]

Ok, here is the latest status. Dateline December 16, 2005 - 07:45

 

We have been banging on the installs for the last couple of days and fully expect to have a final test install available for Dealers and Beta sites today.

(We like to give it to this limited group first to shake it out a little more before turning it over to many hundreds of users.)

 

If things all work as we expect we hope to make it available mid next week.

 

Will it be bug free? No, unfortunately not, but it is a very, very strong release.

 

Speaking of weather... we got hit with freezing rain last night so everything is a skating rink this morning. There is a 10 degree slope between the parking lot and the front door that could not be walked this morning. I got halfway up and then slid backwards 20 feet into the driveway.

 

MR1/SP2 will be able to be installed on your system without overwriting your SP1 so you can work with it without removing what you are using now. This should be less of an impact on your day to day work.

[Jody]

Thanks for informing us on the MR1 release.

 

But do you think that you can send a movie clip of the skating part with the MR1 release. That sounds funny and I think that should be bonus material.

 

Thank you

Jody

[Todd Tracey from Fastech]

You didn't slide down in to Marks vehicle did you? I think a video would be an amazing present for the general public as well.

[Andrew Abken]

Thanks for the status report Ken!

 

Andrew

[Charlie Pierson]

Ken,

Do you ever bring that machine in your avatar to

the Central Mass steam and gas engine show in Orange MA. ??

 

It's a 2 day event held at the Orange Airport on the last weekend of June.

 

http://www.oldengine.org/members/cmsgma/

 

cp

 

ps , sorry about the hijack

[ILv2Rk]

Yes, thnx 4 the update Ken!

 

Andrew

quote:

---

Genesis 1:1

"In the beginning God created the heaven and the earth."

---

and I'm so glad He did!

 

Welcome to the forum brother!

[Guest]

Bug free software

 

Bug free software, huh?

 

Even the "Big Boys" suffer.

 

 

quote:

---

I think we should continue this list,

but most of us pay maintaince, ....

we should stop paying it.

---

Sounds familiar, doesn't it?

 

 

Believe me when I say, at least CNC Software is responsive to their customers needs.

 

[Ken Erman from CNC Software Inc.]

Too late for a video... but it's a good thing there is a giant flower bed in the circle. Otherwise i would had slid 200' down the driveway to the pond and would have been swimming with the muskrats.

[?Mark]

quote:

---

If things all work as we expect we hope to make it available mid next week.

---

So Ken,

 

What's up?

[ILv2Rk]

I agree Mark,

It is Mid-week and still no MR-1 release.

 

Looking 4 that before Christmas.

 

Any great news for us?