MCUtils - Wheelmouse and Menues

[Jody]

Jay,

 

This box has win 2000 on it. with a quotro2 mxr/ex nvidia card in it. i have an intellipoint mouse. that was not set up as the device it was setup as just a wheel mouse. now it works thanks for showing the errors of my ways.

 

 

Jody

[SVO]

Thank you for sharing Andreas.

 

Dan

[stonker]

Thanks, nice feature. It works great on my machine but does not zoom on our second seat. Our second seat is only mill level 1. Could that have anything to do with it? Both computers have the same guts.

[Henk]

Andreas,

 

I also downloadded the "separated buttons", Great!

Zoom works, but the dynamic- and panfunctions not

 

V9.0SP1 Win2000 Prof./Logitech cordless

the "gvdymic" works good, so i do'nt think it's an video problem

 

 

After an shutdown and a newstart the problems are gone, and the dynamic wheelzoom works Great!!

 

[ 02-25-2003, 05:27 AM: Message edited by: Henk ]

[Andreas Stute - InterCAM]

Hi to all,

here is a 2nd Edition of MCUtils for Mastercam v9.0 SP1.

 

 

MCUtils 2nd Edition for V9.0 (approx. 40 kb)

 

Copy the dll in your CHook dir of Mastercam.

 

We fix some bugs, reported from you in this Topic.

- Pan problem is fixed

- Icons not shown in Solid manager is fixed

- dynamic rotation: when exit the function with the left mouse click - is fixed

 

reagrds

Andreas

[Camdude®]

spot on ole' bean. a c-hook i'll use a lot...

[Slick]

Stellar, Thank you.

[Fred from Université de Sherbrooke]

Andreas,

Very nice C-hook!

Here's quick question. What about lathe? Would it be a big job to do it for lathe, or mill/turn...?

Thank's!!!

[Andreas Stute - InterCAM]

Hi Fred,

we will try to implement lathe in the v9.1 version.

 

regards

Andreas

[Thad]

What fixes were done in the 2nd edition? I didn't notice any changes. All works well except for the scroll feature is now "disabled" in other MC applications.

 

Thad

[heeler]

The C-hook is pretty cool, I really like the toolpath icons. I have a spaceball so that the wheel mouse stuff is redundant.

 

Thanks

 

Glenn

[Rekd™]

Mmmmm, Spaceball...

 

'Rekd

[maestro]

Spaceball rule

[Jody]

quote:

---

here is a mc9rs.dll with the separated buttons in the Operation manager.

It is just a 1 minute job.

 

MC9RS.dll for v9.0 SP1 (approx. 600 kb)

 

 

Copy the dll in you Mastercam main dir.

(but please save first your orgin mc9rs.dll)

 

The DLL is for v9.0 SP1.

 

regards

Andreas

---

Andreas,

 

This is for 9.0 sp1 do you have a mc9rs.dll that has the changes in the menu for 9.1 that you would share with was. I really liked that feature.

 

thank you,

Jody

[Andreas Stute - InterCAM]

Hi Jody,

here is a mc9rs.dll with the separated buttons in the Operation manager. I change also a litle bit the file get dialog. We extend the file name field it because we use always long file names.

 

 

MC9RS.dll for v9.1 (approx. 650 kb)

 

 

Copy the dll in you Mastercam main dir.

(but please save first your orgin mc9rs.dll)

 

The DLL is for v9.1

 

the new MCUTILS for v9.1 can be found in Topic:

mcutil v91 topic

 

regards

Andreas

[pip]

Where can I download the German version.

Assuming that because you are a German firm, then you must have a German version.

Thanks

[Jody]

Thank you Andreas,

[Andreas Stute - InterCAM]

@PIP

die deutsche Version von MCUtil befindet sich auf der v9.1 Installations-CD und wird automatisch mit installiert. Bitte bei PS-Data nach der v9.1 CD fragen.

 

mfg

A. Stute

[pip]

Thanks for the information, but at the moment my collegue is using version 9.0 SP1. I have looked at your homepage, but can't find where to download MCutil.dll on your site.

Thanks in advance.

[Andreas Stute - InterCAM]

Hi PIP,

the link to the german Version is:

Mcutils for v9.0 - german edition

 

In the german formun under:

Mastercam Forum » Download-Bereich » Dateien für Mastercam V9

 

regards

Andreas