4th Axis Pell Mill on an Impeller Crazy Milman style

[crazy^millman]

Hope everyone enjoys some of the fun I have had making this part.

 

[Newbeeee™]

Atter boy Ron

[CADCAM3D5AXIS]

Looks like Fun Ron

Happy TGIF to Ya

[Watcher]

Well... that´s a walk your talk...,

 

:respect:

[TK-32™]

Good job Ronaldo

[#Rekd™]

Where is TK in the video? ROR

[TK-32™]

Taking a Siesta

[Jeremy Herron@DBS Solutions™]

Nice work Ron.

[#Rekd™]

Where is the Brazilian jersey Ronaldo? ROR

[Zoober]

Taking a Siesta

Tk: "Hey Ron! I gonna put a cot in the chip pan..."

Ron: " I'll make this peel mill as rhythmic as possible. Oh! And there's a taco on teh way cover!"

[Zoffen]

That is SWEET! I love it!

 

Food for thought tho....

 

any way you can get that back feed rate a little faster....seems like you could take a chunk of time out if you got a faster back feed.

If that is axis sub....Does the axis sub take out the back feedrate?

 

anywho that part looks like alot of fun!

[Bob W.]

Lol! I was watching this with my machine running in the other room and I kept hopping up to go check on strange noises I heard, only to realize they were machines running in the background in this video. Thanks for sharing.

[TK-32™]

The c axis encoder on this machine is not very good. Weak sauce!!!

Ron programmed this faster but an alarm would trip. We had to slow it down.

 

Can't wait to try this my self one of these days.

 

[Zoffen]

The c axis encoder on this machine is not very good. Weak sauce!!!

Ron programmed this faster but an alarm would trip. We had to slow it down.

 

AHH i see. I know that feeling. Always fun to find the limits!

[Aaron Eberhard]

Nicely done (as always!) Looks like fun!

[Jayson Kramer]

TK what is the machine?

[TK-32™]

Deckel Maho DMU100T

[crazy^millman]

Someone liked this so I thought it was worth a bump.

[JMahon]

What toolpath is this?

[CJep]

What toolpath is this?

It's a 2d high speed peel mill that's been wrapped around a dia to create an axis substitution.

 

That's stinkin' cool Ron,..

[crazy^millman]

It's a 2d high speed peel mill that's been wrapped around a dia to create an axis substitution.

 

That's stinkin' cool Ron,..

 

Ding Ding Ding we have ourselves a winner. Yes it was cool and very neat to see it all work out like I had hoped. That is the beauty of this work is how it can be my way to express my creativity. On paper looking at my education I am of average ability and intelligence, but when I get to do this I feel blessed to see what abilities I have been blessed with. Fun to have conversations with highly educated people. I still get asked where did I get my degree from to do what I can do and to know what I know. I always refer people back to the the University of OJT. (On the Job Training)

[cincy k]

Are you able to wrap a toolpath along a contour? Say you want to create a toolpath like this that follows on non round surface. Or in my case wrap the toolpath along a curve that has a straight lead in from air into the material and wrapped around a cylinder.  I've tried using 5 axis roughing in 2018 but can't get it contained the way I want to. 

[jeff]

Sweet!

[crazy^millman]

Another couple likes to this one so here is it bumped again.

[cincy k]

1 hour ago, C^Millman said:

Another couple likes to this one so here is it bumped again.

Can you look at my post above? Wondering if a toolpath can be wrapped along  wireframe.