MACHINEMASTERG
-
Posts
1,216 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by MACHINEMASTERG
-
when we cut plastics hss cutters very sharp as you have all said and climb to ruff conventional to finish leaves clean finish
-
it rips!!!! the IT guy told me the card is worth$$$ more than my old computer so far its great it makes for some very happy shop guys before this we only got enginering hand me down computers we finally got it through to managment that the shop need power boxs too!!!
-
thanks again for the replies this new box rips i went from a p3-933 to this MERRY CHRISTMAS
-
thanks iowajim i set data to 384000 and toolpath allocations to 256000 and i dont get the error message but im only using 661.3 mb and the it guy said the windows is set at 3gigs???i was always told to set these numbers to 80 persent of total ram???but anyway ill stop whinning because nomatter what its set at it RIPS and its about time the shop finally got a decent box
-
anyone with a thought on this we have our allocations set to almost half of our available ram??? what good is the 1 gig if it wont let you use it???help
-
we just got xeon 2.8 ghz with 1 GB RAM SCSI 320 controller and a 18gb 160 hard drive with a 3D labs wildcat video card. The problem we are facing is when we try to allocate more than 592 of the 1024 avalible megabites to allocated memory we recieve a memmory allocation error value was reset to previous value.
-
merry christmas!!! happy new year !!!just finished the company party now its home till next year yea!!!see you all in the new year!!!
-
i think the positioning idea sounds good !!we use linier axis slides on our packaging machines and do accurate postioning for filling and stoppering all controlled with a plc maybe you could build your own setup at an affordable price???
-
duuuuuude you got a dell!! ME TO it runs great even without the best videocard!!
-
how about doing the engraving under a differnt work offset?? maybe g56 and in the offset page tell it a axis is-90. then it will give you code as if it is at a0 but you told it in the offset page to be at a-90 ????
-
thanks for the invert a bolt tip ive heard of this but the web site really makes it nice to see
-
i remember then coming in the first newsletter it tells you to fax ??? first come first serve i bet sometime soon we will see this
-
we have that same g49 in our startup and never saw this??? in fack at the end of the programe it outputs g49 z0 before m30 and nothing like heading for the table ever happens???/
-
thanks !! anyone else ????
-
thanks roger I WANT TO LEARN il buy it and try it !!!
-
ooops ive already ordered with this setup will it be a big problum????maybe they havent shiped yet!!! thought i had it when i stayed away from the ATI card thanks !!!anyone use this card??? [ 12-09-2002, 06:03 PM: Message edited by: MACHINEMASTERG ]
-
quote: What kind of machine tool is this for? A fadal? no a haas we have a post that was tweeked to do this and ive tried to duplicate what was done to it in the mpmaster post but no luck or no skills for that matter !! i like the mpmaster but the drilling could be better g83 i,j,k g73 q,k etc...
-
how does this card perform with mcam ...64mb geforce4 mx 420 w/tv out??my other choice is an ATI card but from what ive seen here... nogood?? thaks in advance
-
what would it take to get mpmaster to output in caned drill cycles ??? g83 with i,j,k insteed of q?? and in g73 q and k ?thanks in advance [ 12-09-2002, 05:38 PM: Message edited by: MACHINEMASTERG ]
-
O/T - Pallet Changer or Another machine?
MACHINEMASTERG replied to jspangler's topic in Industrial Forum
we made a quick easy fixture locator pallet using on our reciever pallet 1/2-13 threded inserts with a .625 id drill bushing over top and on the on off pallet milled and c-bored for a .6245 od stripper bolt the bolt goes thru top fix c-bored below top and into bottom pallet locating thru drill bushing into 1/2-13 thredes 4 or 6 locator per fix and it works great and cheaper than other systems we saw hope that helps ??? -
SolidWorks 2d sketches into MC
MACHINEMASTERG replied to locusindustries's topic in Industrial Forum
we use solidworks and do engraving like this just have it extruded into surface like .01 deep then it will come into mcam as a sldprt parasolid part -
reg> let me know how you make out i to am looking for a good clean pst for haas lathes i modified lpfan.pst to fix m3 m8 etc but threading and some other can text still isnt right??? guess after i learn wcs better ill take on post processing then some spelling classes
-
i agree there are always limiting factors when sloting to pre drill or not?? but either way the slot function was a good add on to v9
-
EXPERIENCE and add to your resume that your a mastercam forum member that should show them!!
-
i like the way it ramps down as it slots this way no predrill [ 12-03-2002, 06:54 AM: Message edited by: MACHINEMASTERG ]