Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Go into the harvey website.under the threadmill section theres some really good info
About feeds and speeds, depth of cuts for different materials,even a formula to figure out
Radial feedrate.good info. Just to check out. i recommend it.
Aqui vas encontrar ayuda donde te lo puedan explicar mejor en español.
http://auxcad.com/index.php?app=core&module=search&do=viewNewContent&search_app=forums&sid=586535b6e7b03c93236e7bc22ea6392a&search_app_filters[tutorials][searchInKey]=articles&period=months&userMode=&followedItemsOnly=0
Emastercam es el mejor foro para mastercam. Pero la mayoria de los miembros
De aqui hablan ingles.
mastercam will do just fine, but it takes someone to know how to do it.
you'll be fine with some training. we had few guys here bashing mastercam
telling the owner that it can't do this and it can't do that, so the owner asked for
my opinion, and I told him the only thing these guys need, is some training.
after they went to training, VOILA. now all of a sudden mastercam does do all those things.
honey bunches no disrespect, but you might not have enough work because you're being outmachined
by companies with modern equipment.
is that how the guy from barefoot cnc said it?
like I said no disrespect.
I don't care i'll say it again.
"I find it hilarious when we get a new member on this forum, and their very first post is asking for a post for their machine."
been programming using mastercam for about 10 years, and about 2 years ago I opened a level 1
book just to check it out ,and picked up a few things. always learning something new
the key thing here is to make sure to tell them about the models before you sign anything. cause if you tell them after
the sale is over, well their gonna want more money from you.
them guys at shopware are good. im curious what happens if you try to verify half of your ops.
just to see if it loads completely, then try to verify the second half ,and again just to see if it loads
the whole thing. just trying to pin point the problem
I know this su#@, but I use a manual entry with unlock codes before the 5 axis operation
and a manual operation with the lock codes after the operation, because if you manually
unlock the rotaries you have to manually lock them or else they wont lock.
You're right about that, but when you ask for help with a post issue it's a little bit more involved.Someone would have to take a look at your post and pinpoint the problem, and you are in the right place for
Help , and to learn mastercam.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.