GIZMO 21
-
Posts
243 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by GIZMO 21
-
Its true what ron says about piracy, so yes i agree with him.
-
Get in touch with shopware their really good guys over there.i usually send them a z2g file and them guys jump on it right away.
-
I hated the new verify too, but once you get everything tweeked in, you'll like it better than the old one. of course this is my own opinion.
-
yes to what tim said. or read the next thread. http://www.emastercam.com/board/topic/72931-x7-verify-level-entities-showing/?hl=%22x7+verify%22
-
cnc software is aware of this and are looking into it.
-
I haven't had any issues with them. I find them easier to use.
-
It still does the 1/4 start.
-
Ah, i see what your saying.
-
Try unchecking your helical entry in lead in/out in the cut parameters.
-
yep, that did the trick for me. thank you.
-
Thats the one that i'm seeing.i'll have to try your suggestion tomorrow scott.
-
I'll have to check that out scott.
-
Every time i update all above,then i post the same mcx file in the new version and in the old version and compare. As far as i see the nc code is always identical.
-
Did you update the post/control/machine from x5 to x7?
-
Youtube videos, ask questions in the forum, and i hate to tell you,but eventually your gonna have to invest in training
-
yes I see the same thing, and your right it's not a big deal so I'm really not worried about it. I haven't really looked into seeing what the issue is.
-
your right, I haven't seen this problem, but I just tested what you said and it does crash. we'll just have to hear others input on this.
-
now this changes things being a mill-turn. that's what tyler is saying
-
Dynmanic Contour for Oring Grooves and Bowl Cuts.
GIZMO 21 replied to crazy^millman's topic in Industrial Forum
Always a pleasure. -
I don't think your gonna get what your looking for, because when you draw half the tool mastercam creates a revolve operation. that's why your tool looks like a keycutter.
-
I was never a fan of migration myself, but this worked great.
-
I believe the fixture button works only for lathe right now. if you have your fixture model up all you do is turn on only that level that contains your fixture start verify and you should see your fixture in verify. i do this all the time with my vises or fixtures.
-
ron, I think he want's it parentheses.i'm curious as to why.
-
Customized post wont post G98
GIZMO 21 replied to StoneyNH's topic in Post Processor Development Forum
post editing shouldn't be taken lightly. you can really get your self in trouble if you don't have any type of post editing experience. -
good to know your up and running.
