GIZMO 21
-
Posts
243 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by GIZMO 21
-
here we have our dongle for the nethasp in a computer in another building 2 blocks away. dang I think I just got lucky.
-
I don't think, but you can create another op with different feeds and speeds right under your first op.
-
I did the same bob.but since its been out in the public beta and heard good things about it.i installed the public release right away and so far its been good.the only issue I have ,and I know you use vericut so for you it doesn't matter,but my machine simulation is behaving a little weird.i already contacted shopware about this issue just waiting to hear from them.
-
I was having the same issue when installed x8. I renamed the original nethasp.ini in x8 and copied the nethasp.ini from x7 into my x8 folder and all is good.
-
that is correct.the only thing you can import is your right mouse click settings.
-
Osg powder metal drills work great. Here we go. http://www.osgtool.com/c1900.htm
-
Thank you sir.
-
Having lots of issues with X7 Simulator. Need some help.
GIZMO 21 replied to rad_rob's topic in Industrial Forum
Try here http://www.emastercam.com/board/topic/72935-getting-more-out-of-x7-verify/#entry852132 -
Having lots of issues with X7 Simulator. Need some help.
GIZMO 21 replied to rad_rob's topic in Industrial Forum
I had same issues with verify's new look and fatures.but after getting all my settings tweeked its a matter of getting use to it. So far I'm really happy with it and don't miss the old verify at all. -
I believe you when you say that.i rather train someone who knows nothing about it, than someone who knows A little,because someone that knows a little is enough to be dangerous.
-
I also try to cancel cutter comp with a g1 move setting the same parameters.
-
Naa jim the cutter comp start should be on a g1 move.if your doing a straight cut.set it in your Lead in /out parameter page.if your using it in circle mill adjust in your start/end angle parameter page.
-
Live Tooling Post For Haas ST-0
GIZMO 21 replied to Mastercam Rookie's topic in Post Processor Development Forum
REALY!!!!!!!!!.YOU WANT A POST FOR A TAP WRENCH?.you better read the forum rules. http://www.emastercam.com/forum-guidelines/ -
No crashes here either.
-
On the nikken there is a precise bore on it.so the base that i made has a boss the size of the nikken bore minus a few tenths And i have 4 3/8-16 bolts hoding it down to the platter.could'nt go with the quick change cause we're limited on machine z axis travel. But this set up works out great for us.we're mainly a prototype shop.our quantities are 10 parts the most.the parts that i make on this machine range from 1/2 x 1/2 x 1/2 to 5.0 x 5.0 x 5.0
-
I ordered one based on info i read here.now we have 5 and 1 of the small ones.i think its like 2" wide. We are very happy with them.the lang dealer sends them out on trial because their confident in the Product.
-
If you mean james lock him in there don't let him out
-
Wow! Good quality on the video.good job.
-
Yep.
-
Just curious,are you 5th axis inc. out of san diego?
-
Very nice derek.thank you.
-
No restrooms in the building?.
-
That is a good problem to have
-
Try this link first tk-32. http://www.emastercam.com/board/index.php?showtopic=37406&hl=%2Bmemory+%2Bcard
-
Check here.you"ll like it. I know i do.
