Jeff Kemper
-
Posts
148 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Jeff Kemper
-
. . . and the location of the "toolbar area context menu" would be??? Help/contents/index/&search appear to have no new info re: the new MRU toolbar on/off toggle, and hovering over each button in the default toolbars does not find it.
-
Bullines Some French researchers years ago discovered you could divide the four phase sleep cycle into 4 separate sections. So the cycle is, 3 hours 15 minutes awake and 45 minutes sleep. It works, but that only gets ya 19.5 hours/day. Jeff
-
I had the report window pop up after Mcam shut down. Only indicator I got that it was working/trying to work, was ZoneAlarm pop'd up to allow the report to access internet. I don't think yer email program needs to open for this to work. Also when filling in your text message in the report, you can not use the "Enter" key to start a new line. "Enter" appears to perform the same function as the "Send" button
-
Are hot keys gone forever?
Jeff Kemper replied to Metal Flake (clocked in)'s topic in Industrial Forum
You still have single key functions inside of commands that appear in the Ribbon Bar. To see 'em, check mark and save, Settings/Configuration/Screen/Use Learning Mode prompts. Then hover yer cursor over da buttons, 'til ya memorize what can be used where. -
"alot of real estate to cover with your pointer." use mouse ballistics?
-
Was talked about before. "MCX backplot" http://www.emastercam.com/ubb/ultimatebb.p...ic;f=1;t=016084
-
T.J. Does Ken's fix do the same thing?
-
Ken "All of the bitmap images are built into the code itself." What was the rational behind this decision?
-
Code hasp 4?
-
Todd I believe it would have to be fairly new to be parallel AND hasp 4. Did you upgrade recently? simswap.com has a utility to test it to see if it is a hasp 4.
-
Mark Even if CNC is aware of this thread, (I believe) they will ask you to send a bug notice to [email protected] re: the non-reversing arrows.
-
http://www.emastercam.com/ubb/ultimatebb.p...=1;t=015925;p=5 Finland, no codes.
-
Somebody said they got it, with codes, in a Scandahovian country, Sweden?
-
Hinstall470.zip on the "cadcam's FTP site" at the top of this page. In the unspecified_uploads folder. Don't know if this is what you need. It may be if you want to not run "compatability mode to 98". re" Cadcam's comment above, Do you have a green hasp?
-
maybe here? http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=013050
-
http://www.streamingteacher.com/home/index.aspx
-
Thad Thanks for QC'in this for CNC
-
If YOU want to learn X (probably a good thing) recommend it. Call yer reseller, he should be able to give reasons to upgrade related to your parts. If Mill Level 1 works for them AND in the future they want to upgrade, something other than MC, much less $, may be the way to go.
-
Chuck Your welcome. Welcome to the forum!
-
Alt-T
-
Betts The top of this page 'codes by Aug. 15'
-
Translation "the current release version" = .NET 1.1 ????
-
It is not in Help /Contents/Search/Glossary It is Help/Update Mastercam
-
X Autosave does not work the same as V9
Jeff Kemper replied to J Coulston's topic in Industrial Forum
Rookie That is a good trick, or maybe we should call it a "feature". It appears the Ribbon Bar is not movable/dockable, and when I tried to place other tool bars on top of it, they just jumped below it. -
I think what is being done; free or charge$, maintainence or not; is totally up to the resellers. Also I believe each reseller is writing their own orientation classes.