Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
thanks slepy,
can i do this with a 2d wire frame or do i need to create some sort of surface? if possible a example would be great. I would post what i'm tring to do on the ftp site but am having problems uploading. another xp/it problem. thanks
I finally got a post for our mill turn machine and was wondering if there was a easy way of programming somthing like a 45 degree flat on the face of a part in 6 places. I have done this a little but i thing there has got to be a easier way. to get it to work for me I create a solid than my 6 flats and have to change my construction plain for each flat. Is there a simpler way? any help appreciated.
ron
it is coming from the lathe library (i'm pretty sure) this is what I see in the post for the insert information
#Tool note
stoper #String for tool notes
stinsert " INSERT - "#String for tool notes
stinsert2 #String for tool notes
# Tool Comment / Manual Entry Section
# --------------------------------------------------------------------------
pparameter$ #Information from parameters
if prmcode$ = 10000, stoper = sparameter$
if prmcode$ = 20103, stinsert2 = sparameter$
ptoolcomment #Comment for tool
tnote = abs(t$)
toffnote = tloffno$
strtool$ = ucase(strtool$)
stoper = ucase(stoper)
stinsert2 = ucase(stinsert2)
i'm just lost but am probably overlooking somthing simple
thanks
I am tring to get my tool comment line to output the tool holder information but can’t figure out how. Right now it looks like this which is close
( ROUGH FACE & TURN TOOL - 3 OFFSET - 3 INSERT - CNMG-432 ).
What I would like it to look like is
( ROUGH FACE & TURN TOOL - 3 OFFSET - 3 HOLDER - DCLNR-204D INSERT - CNMG-432 ).
my post has the following line.
"(",*strtool$," "*tnote,"",*toffnote," ",*stinsert,"",*stinsert2,")", e$
does anyone know what i need to add? thanx
I can't beleive i have to ask this but. We bought a used mori mt-253 5 axsis lathe. unfortinitly I got no books and no trining so I am confused about using the tool probe. With the B axsis at 0 I have some tools that are to long to touch. I can turn the turret to B-90.0 and touch but the ofset is wrong when i go back to "0.0" anyone with a clue on using the tool probe that could help I would appreciate it. I hope i'm explaining this half way decent. Thanks in advance
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.