Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
MayDay It was a solid to begin with. I put it on the ftp site in the MCX2 files. Named Bread pan.mcx if anyone wants to look. Ball nose. I will try waterline.
John,I'm trying the parallel steep. Can you change direction from up and down to back and forth.
Kannon will try to create a boundry after I try waterline.
Yes I'm lost.
Thanks everyone for the help!!!
I'm doing a part that looks like a small bread loaf pan with 2 holes in the bottom. It goes from a .38" radius in the corners at the too to a .13" radius at the bottom in the corners. Plus .13" radius all around the bottom. With 13 degree draft. I filled the holes with surfaces.
I did a surface rough pocket tool path to rough it out. But now can't figure out how to finish it. The rough pocket has 19 drive surfaces. I tried surface flowline and surface finish contour. flowline didn't like all the surfaces and finish contour tried to cut inside and outside?
Dazz I'm with G-code, I have 3 sessions of MC open ,1 pro-e session and open office. Plus emastercam mozilla and XM. Duel screens and all. Sometimes it sounds like my 'puter is fixing to fly away because of the internal fan(go figure).
Only trouble I was having is when I would sometimes close a session of MC I would get the unhandled exception error. The link Dave sent Hardmill to seems to have fixed that.
Thanks Colin, I must be slow. I tried and tried yesterday and couldn't seem to get it to work. Works today. Either I just didn't see it work before or...??
Thanks again
quote:
I thought he meant he needed a chair to reach the spindle
That's what I was thinking before scrolled down and looked at the link. I just knew it was going to be a link to a lazyboy or something.
I use a chair or 5 gallon bucket all the time to reach the backside of a tombstone.
Thad are those worth the money? Always wanted to try one.
I am using surface finish flowline to bore a taper surface. 1.0625+/-.0005 with 32 finish. I am using a 2 flute iscar multimaster tool with a .04 radius. I have the scallop height set to .0002". The finish in Z is almost a 32 but you can see lines every 10 degrees or so where is updates the tool path. It looks almost like there are small flats. Where can I go in and change how often on a arc the tool path updates?
I'm trying to figure the best way to put in a taper hole.
Mat'l = Silicon Bronze
Angle= 21 degrees 24 min
small end= .650"
Large end= 1.062"+/-.0005
length of taper= 1.120
One of the main problems I only have .06" past taper to bottom of blind hole. Plus part is a casting , very odd shape. Would be very hard to fixture in a lathe.
I'm afraid if I tried to circle interpolate with a taper endmill that I would pull the part out because of side pressure.
As far as I remember I haven't had any crashes with this version. On 2 different computers.
Hardmill, a floppy is what your underware are after cutting grass in 105 degree weather.
Open MCXStart. That is the mastercam editor. When you go to open there it defaults to .nc files. You can copy a shortcut of this out of C:McamX2-MR2commoneditorsmastercamMCXSTART.exe
Thanks for all the help. Finally found out by accident. tools / Options in mastercam editor. Uncheck "open files maximized" and " Start Maximized". Now it opens in monitor 2. This is sweet!!
Thanks everyone!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.