not yet

Chris is still working on it hope it will be solved soon

you can use STL files in verify I think there was a C-hoof to build surfaces from STL but with ver 9 , but you can use other program to build a surface with STL , I think Rhino do this .

Thank chris hope you will find a soulution for this soon

I had this problem with X3 and now it continue with X4. I have Mastercam Installed on XP 64bit Machine Engraving not work at all, it give error and close. every time I move the file to 32bit machine and make the engraving there, but it annoying. I tried with QC but nothing... any one have this issue too and did he found a solution for it?

very nice

No

John did you sent it to QC? I sent it , didn't solve the issue yet.

I will

Thanks John so its not my computer only, I tried for more that two weeks with my dealer, but nothing helped, for this I asked here to see if its only me . so, is it bug or something?

The Engraving is not work in X3 using 64bit winxp. I tried it with 32bit , work fine. any one have engraving problem with the 64bit?

you can convert it with Rhino you can download free copy of Rhino and convert the file or if someone here can convert it to u.

in Mastercam editor click on Window, Cascade you can chose Tile Horizontal or vertical I think this is what u need

ok this is what you need http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=022086

I remember there is was a chook from grandesoft company that exactley do what you want in Mastercam. there was trial ver for it

Rule #1: Don't ask for a Post Processor. Ask this question as your first message here and you won't necessarily like the responses you receive. The eMastercam.com Lynch Mob is on much higher alert than you could ever imagine. Look to your reseller to supply you with the proper post for your machine, or quote for the work that needs to be done. If you have something and are looking for improvements, it's a reasonable request. Maybe tell us why the post you have needs improvement. Perhaps try to participate a bit on the Forum before you go asking for something. Not unlike Habitat for Humanity, we value Sweat Equity here. Quid pro quo, Clarice. You may also want to let everyone know your company name so that your Hotmail or Yahoo email account doesn't give everyone the impression that you aren't a licensed Mastercam user.

working with win xp 64bit for month now. no problem with Mastercam.

on the old computer all is work well at the same version of mastercam, it don't have normal gforce card. Iskander, when you are in the selection in the draft solid you cant rotat the part. I think its some srtting for the card, I will try to play with it today to see what will got.

yes I tried that, and it calculate it it make it right without error, but it don't show me the cone

in the solid draft , after selcting the face I want to draft it should give me an arrow and cone shaped. I see the arrow only. this is new computer with Quadro FX 1500 I trid to change settings, but no luck any one had this issue?

what ver of mastercam u have? if u use X2 then try the (edge tolerance) setting in the solid from surfaces. make it bigger may help but it depend on your surfaces and how much clean they are.

logitech MX3100 , very comfort

John , you answer in the wrong place litnin, I got new computer with quadro fx 1500 it seems all is fine .

I didn't use the WCS in this one. any way, the part is almost done without problem. thanks any way John

I am making simple contour ramp using 80mm flycutter, so far so good. if I am making verify with turbo it not work. vreify with simulate tool work fine. X2mr2