Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Fred @ Slate Industries

Verified Members
 View Profile  See their activity

  • Posts

    970

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by Fred @ Slate Industries

  1. Fred @ Slate Industries
    I recall everything that moved on the network had to loaded (Temp) and then sniffed for trouble at on place I worked. That was the killer. FIX = Backed up to the network after that but worked straight off my HD from then on out.
  2. Fred @ Slate Industries
    Never use Blank Use Alt E "Hide" / (All color/ surfaces / wire frame on and on...
  3. Fred @ Slate Industries
    Bob I can see over 50 Building code violations in your first picture... Oh wait your not building in Dupage Co. ILL Never mind , Looks Good !
  4. Fred @ Slate Industries
    It's all in the Benchmark thread... "Proof is in the pudding" I was told (with the release of X4 ) to buy a certain build etc. ends up MC didn't support 64 bit & multi core processing and It was a TRAIN WRECK !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Bench mark thread, and duplicate what other's have done with there boxes.
  5. Fred @ Slate Industries
    Plenty of "work a rounds" at a minimum. Message me if your at a dead end, i'll give it a go my ILL. brother
  6. Fred @ Slate Industries
    Crap
  7. Fred @ Slate Industries
    File save as. or ? X8 to X7 Is it possiable? I thought you could except the toolpaths Wont come along for the ride. Thanks !
  8. Fred @ Slate Industries
    Email sent.
  9. Fred @ Slate Industries
    I have two minimum MC sessions going in X8 and the other guy has at least one of X7 going. Never had a single problem.
  10. Fred @ Slate Industries
    Unlike every other post out there on the Net hanging out there after the fact.... Did it Work ?!?
  11. Fred @ Slate Industries
    Wire Start holes ? Any who .0625 We would just by a envelope full of std. black "Precision Twist brand " drills and throw each one of them out after every ten holes etc. You will be fine. There Too small to re sharp even in a high end Darex in my experience. "Perishable tooling "
  12. Fred @ Slate Industries
    I'll send you the post mmd and control files. You have to have the Hurco in ISNC mode. PM me an email addy to send it too.
  13. Fred @ Slate Industries
    Thanks ! For what I'm doing its the quickest solution.
  14. Fred @ Slate Industries
    Hi guys It's been a few years What is the protocol of running my code off the makinos USB ? Thanks!
  15. Fred @ Slate Industries
    Had to reassign pan to a hot key And turn on spin in cfg.
  16. Fred @ Slate Industries
    What stinks is (or am I lost here) Drill mask on arc is broke and I can't move my model around in verify dynamically anymore ?
  17. Fred @ Slate Industries
    Same here full X8, not going back
  18. Fred @ Slate Industries
    All Ears here...
  19. Fred @ Slate Industries
    Thank You Bullines ! TSmith@Microplastics 1996-2008
  20. Fred @ Slate Industries
    "I only use it to make the code smaller For some of the old fadals and anilams " You Got it...
  21. Fred @ Slate Industries
    Look at the file size before and after you mess with the filter and regen. That will tell you if and how much the filter ,filtered. High end CNC's Filter your long code themselves, better then the CAM .
  22. Fred @ Slate Industries
    I use them all the time Check surfaces the ultimate "Dont touch this area" !! Early releases of X didnt offer them for a while if l recall ?
  23. Fred @ Slate Industries
    I don't have that toolbar up, was hoping to find the command in the menu or cfg. I'll put the toolbar up turn it off and then delete the toolbar again. Thanks !
  24. Fred @ Slate Industries
    Hair being pulled out 1X I'm all ears .... It has to be something in the initial process / selection right out of the gate "Or it won't work" (For Me, Murlin, & Rhino) !?!
  25. Fred @ Slate Industries
    A little late here How do I hide X8's "Surface Edge" I can't find a switch anywhere ? I don't want to see this unusable , un chainable non existing but visible geo. Thank You

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...