ATG
-
Posts
372 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by ATG
-
Ok I've done some investigating and found some answers but it’s not working for me. The error I’m getting is: Tool's coolant setting are incompatible with this machine. Coolant will not be updated. However this post the proper code. A M88 for through spindle coolant and a m89 to shut it off. If i go into my machine def and turn on the support prev coolant option I don’t get the error anymore however i get just a m8 which doesn’t work. I using mastercam x2,mr2 with generic haas post....any help would be great.. thanks, Seth
-
lol
-
Cant you creat a start point Then chain the start point then the pocket geometry. This should allow control of the tools starting pos.
-
Thats exactly what i was looking for.... thanks again John
-
thanks John I'll take a look.
-
Thanks guys I guess I should have left one side of my chain open when I was trying to use open pocket. It looks like the 2d contour I created. I just thought I could use different pocket strategies and still drop in the z outside of the material. Thanks again....
-
Ok its on the ftp uder mxx2_files Brian.mcx thanks
-
Ok I'm still not doing something right I use the open pocket method still nothing. Am i missing a setting somwhere. John i'm not to sure what you mean :"chain a point outsidie of the pocket, it should start outside and then move inside AND the respect the boundary on each Z cut." Are you still talking about a pocket tool path. I could through the file up on ftp if someone could look at it.... thanks again.. seth
-
I thought I had an option under pocket tool path to start on the out side of the pocket. I have a piece of 1018 aprox 3.5 x 21.250 x 5.0 that I need to remove some material from the middle. Basically it’s a slot 18.5 inches wide through the part. I wanted to pocket the slot but plunge on the outside of the part. Am I using the wrong path? I am using x2 mr2 thanks. Seth
-
Check surface question flowline or parallel "finish"
ATG replied to neurosis's topic in Industrial Forum
Add a boundry -
That’s what I love about this forum I learn something new everyday. (More like every Hour)
-
Yeah, but whats the fun in that.....
-
Where’s my precious x3. Me needs it.
-
Were of were is Roger..............
-
Man would that be helpful........
-
I've turned in allot of scrap carbide before I learned where the reference point option was!
-
What machine are you running this on. Which post are you currently using.......ect.
-
Machine Simulator( Developer ?)
ATG replied to Troy Gossett Indepak Inc.'s topic in Industrial Forum
Thanks, I'll give that a try... -
Machine Simulator( Developer ?)
ATG replied to Troy Gossett Indepak Inc.'s topic in Industrial Forum
The appropriate mastercam .Net support dll could not be found. then Unkown file type. This is the error that i'm getting in mastercam when i try to run this program...... -
[email protected] sorry didnt know you cant see it...
-
If sombody gets a chance can you email it to me.....thanks
-
Is the ftp server down again
-
Thats what i was looking for.....thank you guys
-
I have the same problem..........
-
Ok I pretty sure I’ve done this before....although I can’t remember. I want to mill a .530 slot aprox 2.0 in length and 1/2 thick. I'm using a .496 end mill. I thought there was a way to 2d contour ramp and put the start point on center of the end of the slot......Bad day today.......