iowajim62
-
Posts
1,565 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by iowajim62
-
Hi, If you make your jaws 8" long or so you could load up 2 parts at a time with more than enough holding capability. HTH
-
Hi, Great response to the boss when he asks about the job being finished. What about V9.1 anybody?
-
Hi Bullines, I like your sig. Can't read what it says tho. When is V9.1 due out?
-
21 yrs. and haven't heard that term before. Are you talking about clamping inside and outside of the part?
-
Hi Kathy, How do you adjust dims. on the part your cutting?
-
No sir. Just thinkin' out loud !!!
-
Turn off caps lock please. That is considered yelling. You need to read the Forum Guidelines.
-
Hi, You might want to machine slots in your jaws instead of holes and c/bores that way you don't have to take the screws all the way out everytime you change jaws.
-
Thad, Try using your left mouse button instead of the right,it doesn't ask you it just moves the op up or down.
-
Hi Thad, quote: I've also had problems changing the order of my ops. I select "move after" and instead it will move it before the op that is before the one that I have highlighted. Have you tried dragging and dropping your ops? It's less clicks.
-
Hi, I have had this same problem pulling ops from the library and getting screwed up order of cuts. Thad, To pull directly from a file go to job setup and hit the Import tab. HTH
-
Hi, We have the Renishaw system as well and it is an invaluable tool for our Maintenance Dept. We would like to run it every 3 months but sometimes work gets in the way. As far as spindle goes our Mazaks run with spindle off no problem. Must be a parameter on the machine control is my first guess. HTH
-
again 418 (9.00%)
-
Hi everybody, He is at 343
-
Wanted - Mastercam Programmer
iowajim62 replied to Verisurf - Ernie Husted's topic in Industrial Forum
Well I can only speak for myself here but I grew up in Iowa and I watched the news and saw 36° for Des Moines and then I saw 77° for San Jose today. Couple other things I like here are the mountains and the ocean both of which Iowa doesn't have. I could go on and on, but so could others about the not so good things here. Freedom of choice is a great thing about being American. -
Wanted - Mastercam Programmer
iowajim62 replied to Verisurf - Ernie Husted's topic in Industrial Forum
$20 Hr. will get almost up to the poverty level. Existence living at best. $30 Hr. will get to the poverty level and now you can turn on the electric and water. $40 Hr. I must be dreaming. jm2c -
Hi Scott, quote: Is this another Battle of "Iwo Jima" LOL No battles just reminding him that Ford is American not Canadian.
-
Hi Andrew, Maybe instead of complaining about Americans you could use that good ol' Canadian engineering of yours and Conceive,Design, and Manufacture your own Canadian cars and trucks instead of bashing the people that were nice enough to give you work in the first place. Sorry to go off but you can't expect nothing less from us Fat Lazy Americans.
-
Hi Hugh, You can run the verify option in backplot that shows your toolpath but it isn't the same as the NC Verify that runs in a separate window. The verify you're thinking of is actually a 3rd party software that runs inside MC HTH
-
Hi jeff, In your post go to Format Statements section. There you'll find what you're looking for. I recommend you make a copy before anything else. If your comfortable editing post files you can make these changes yourself or ask your reseller to help you out. HTH
-
Hi, You have to pick each time. Bummer huh? If you read in help you'll see that it reverts to box each session. HTH
-
Hi Mold100, quote: 9.0 sp1 at Bratton CADCAM Services Congratulations and Good Luck in everything you do with Mastercam.
-
Not to scare anybody or anything,check this out!!! http://www.cnn.com/2002/US/Midwest/11/15/o...fire/index.html
-
Hi Jay, You the man !!! Thanx again for the use of your FTP.
-
Looks like it is down. I couldn't get in either. Jay what happened ?