Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
how big is your current tip bin? What about a small hopper?
We use macx bins https://www.decadeproducts.com/products?utm_source=google&utm_medium=cpc&utm_campaign=products_ad&gclid=CjwKCAjwjqT5BRAPEiwAJlBuBdp6EYhEvEfvMhFXj3Y7EESlIuL41GEJ8cyziGQptkb_kirUSCxZJhoCyQMQAvD_BwE.
They are about 4 ft x 4 ft x 3 ft
Newer controllers have more advanced lookahead that can be adjusted for tolerance also and make a sizable difference in time.
The problem is on the old machines if you go too fast you can round the corner off
Camplete has the 3+1 block which you can remove the Z0 (works on fanuc). It only uses it at A-90 only when the c axis changes though.
Have you tried making separate ops and then using multiaxis link?
It's a little more programming but if you have a million pieces I guess it's worth it.
Not unless there is a GPS device inside of it. When you get this sorted out they should have some type of sign out list or something. Or plug it into a server so you can log in through a VPN or something
Yea, sometimes Mastercam switches the direction on us.
Camplete posts an error about spindle speed when is sees the m4 so we use that to know we have the correct direction
It locks up every time I verify this part. It's a big file but not huge by and standard.
I'm going to try and pick the solid as stock instead of the STL
Yeah I always save before going into verify, good insurance.
I also like to verify because I got burned by camplete once. I have a file saved of the entire ball of an endmill inside the part and it is not red
Has anyone gotten this error. It gives you an option to retry or to switch. If you hit switch it opens a start menu. Basically You have to force close Mastercam because verify never closes and you can't get out of the server busy error.
Could this be network related?
What problems.
Our 520 PC4 had a problem with the pallet in machine sensor but we seem to have got it ironed out.
Our 3:30 is not a pallet but we did have to change the c-axis cable because it detected high resistance. But that was under warranty. Also it seems the clamping is lagging but our machine has pneumatics it's not a hydraulic machine
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.