b_daddy
-
Posts
192 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by b_daddy
-
daul 19 inch monitors or 24 inch wide screenmt
b_daddy replied to phil darcy's topic in Industrial Forum
Why not both? 24" Wide Screen on the left 20" on the right. I don't think I could go back to just one monitor. -
Jeff, On the ftp site,file Solid Help-1 Is this what you were looking for? HTH
-
I agree with Thad, the new way in X makes more sense to me. It was definetly different the first time I used it, but know it is the way it should have been.
-
Brian, Are you using the Helialu of the Helimill? Because if you using the Helialu, they have 18 in stock in Texas.
-
I'm with Ron, Widell has been good for the specials.
-
5 AX, We don't use that software, but we do have Predator DNC. The reason I say this is because I would make sure your delaer has a good support team. Ours was unreachable and had to call Oregon if I needed anything. That's a long way from MI. Good luck on the job tracking software
-
In Ver9 I could go File, Browse, type in the directory and it would flash all the files on the screen that were in that directory. Can we do this in X?
-
Slick, Are you in 9 or X? In 9, go to Screen,Surf disp, Show back. Is this like something you are looking for? HTH
-
Okuma 4va,40va,50va,(2)60vae,MB56vb(love this machine) Okuma's have always ran very well fo us.
-
I am supposed to get mine on Wed., so I don't know what driver. Can't wait to get it. I got the same video card that you have. How do you like that laptop?
-
John, Can you e-mail that program also. Thanks
-
Bruce, I see my link doesn't work because obviously I don't know how to add the link for the Thread page. But if you do a search for "High Feed Cutters" there was a discussion on just this such topic. We use Iscar Helialu cutters here and they rip.
-
Bruce, Check out this thread and see if this helps at all High Feed Cutters
-
That is a very good idea John, I think it would save CNC Software a lot of bad publicity. It does seem that a lot of the issues that people are having are video related.
-
Create, arc, tangent 2 enities (full circle), just like the options that you have with creating an arc tangent to 3 enities.
-
James, If you have any aluminum to cut at all, why not go to something that is designed for aluminum. I use Iscar's HeliAlu and cut 750ipm all the time with a 2 in. cutter, but watch out, the chips come come out like bullets. I love this cutter for aluminum. HTH
-
Thanks guys, I ended up puting those selection options in the RMB and like John said it is just going to take time to remember that they are there. Thad, No kidding, I have been here going on 30 years, right out of high school. They have been pretty good to me over the years. Ahh, Auburn, home of the "Corn Festival"
-
Thad, It's not that I don't like the mouse clicks, it's that when I want to pick chain, I have to pick the drop down arrow, then pick chain, next time I want to window, I go the the drop down, pick window. If all the icons were visible, like in a toolbar, if I wanted chain, pick chain icon, if I wanted window, pick window icon, if I wanted area, pick area icon. But I also understand that you can't do that with everything because of the obvious reason of there would be no room to draw if all the icons were visible.
-
Thanks Steve, That works perfect, now how come I didn't think of that?
-
Steve, Yes, the single, window, chain, area, vector. It would be nice if I could pick these of a single toolbar instead of a dropdown. If there is a way to do it now, I just don't know how.
-
Also, have the General Selection options in a toolbar rather than a drop down
-
bthomps5, We have a LB15 from 1984 and those machines just run. The only thing we have done to it, is replace a drive board once and a light bulb. I,m sure MC will work very well, our machine has Okuma's IGF on this machine, so the operators do their own programming.
-
How about sometime in May
-
Looking at a new laptop myself. This one is a Toshiba. How does this one sound? Intel® Core™ Duo Processor T2400 [1.83GHz, 2MB L2 cache, 667MHz FSB] 17" Diagonal Widescreen XGA+ Ultimate TruBrite™ Display (1440 x 900) NVIDIA® GeForce™ Go 7300 with 256MB GDDR2 discrete graphics memory 160GB: Two 80GB HDDs (5400rpm, Serial-ATA) DVD SuperMulti (+/-R double layer) drive Intel® PRO/Wireless 3945ABG (802.11a/b/g) Thanks, Bryon
-
Not me either ------------ Bryon