Verisurf hole axis chook

[maestro]

How can we obtain the Verisurf hole axis chook?

[Jayson Kramer]

use the link at the bottom of this page were it say Verisurf with Mastercam Add-ons

[maestro]

Thanks Jay, are these compatable with X4MU1?

[gcode]

The X4 version will run on X4 MU1

[maestro]

Thanks gcode

[Ron Branch @ 5th Axis]

Thanks guys.

 

Also there is new tools for creating points and vectors. Check it out. Any questions juts post them up.

[Steve Hattori]

Really nice- thanks for keeping it updated!

[Don S at Barefoot CNC South]

Ron can you put them in a zip format??

[crazy^millman]

Don, I am on the road till next week. I will send you link if I can get it done before then.

[mig]

What this c-hook about ?

[Ron Branch @ 5th Axis]

The hole Axis is more than a Chook at this point. It is an addition to the Mastercam environment that allows the user to take any cylinder in a model and make a Axis or Vector line, a circle the diameter of the hole, and point. You have several different options with this free add-on to Mastercam. There is also some other free tools in there for creating points and vectors. You can access them from the Verisurf drop down that loads in when you install Verisurf or you can add the buttons to any toolbar you create you own. Here is a topic I talked about this in.

 

Linky:

[kkominiarek]

i downloaded and installed verisurf addon for X4....i do not see the hole-axis c-hook.

 

where's it hiding?

[Thad]

Ken,

 

Try Settings-Customize.

 

Thad

[maestro]

The install should have added a verisurf drop down menu to the top level menu bar. All of the verisurf add ons are found in this drop down menu.

[kkominiarek]

thkx.....i was looking in c-hooks

[Ron Branch @ 5th Axis]

Yeah it has been simplified.

 

Here is some other things the add-on will do:

 

WCS

 

Points and Vectors

 

HTH

[phil darcy]

Ron, do you have a direct link to this.

Don't see it named this for down load on Verisurf site.

Thanks!

 

Phil

[gcode]

quote:

---

do you have a direct link to this

---

there should be an advertisement for it at the bottom of this screen .. the one that says

"Mastercam Add-ons"

[mig]

when I trying to d/l this magic addons some another website appears ?????

[Dan@home]

Same here..

[Ron Branch @ 5th Axis]

It seems the links for download are broken. Will check on it Monday and get back to you guys. email and I can provide a different way to get it. Sorry it is not working.

[gcode]

The links on the Verisurf advertisement at the bottom of this page are working fine for me.

I just downloaded the X4 add-on as a test

[Ron Branch @ 5th Axis]

Tom I just checked it from 3 different computers and I am not getting the links to our page. I have sent an email to see about getting it addressed. Did you make sure your cookies were cleaned out, before going to our downloads page?

[gcode]

no I just tried it and it worked

I'll try it on my laptop after dinner

[gcode]

no I just tried it and it worked

I'll try it on my laptop after dinner