spade117
-
Posts
803 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by spade117
-
I understand all that you are saying...just trying to figure if there is a *set in stone* method that is used. I know in theory that using your best judgement every time you process a job is probably the best route to take. I'm just trying to understand if there are other ways for it to be done.
-
What do you mean by stock amount? The amount of pieces or the size? What determines that you get 5 extra pieces?
-
I'm interested in this thread. Zoob - Will this omit offsets that are unused within the mastercam file?
-
Fanuc 31i control and HPCC
spade117 replied to Tim Johnson's topic in Machining, Tools, Cutting & Probing
Yes, 16i and 18i controls we do use it on. -
Fanuc 31i control and HPCC
spade117 replied to Tim Johnson's topic in Machining, Tools, Cutting & Probing
We have one 31i control and we have not used the hpcc coding on it. It seems to handle the code without any problems. -
THX. That works pretty good.
-
I know this is a very old thread, but it was the most recent I could find. I'm looking to be able to add block skip to entire toolpaths. Can this be done in X4MU3?
-
Internal Tool internal
-
In the machine group properties>tool settings>adjust feed on arc move.
-
I've noticed this problem on laptops that don't have high end video cards, but never on a desktop system.
-
I think that is part of the problem. He said he's selecting a *drill* for tool type. Is there a reason why *tap* isn't being chosen?
-
Yeah, I usually just use endmill also.
-
I've done that as well. You just have to be careful on how you get the part off the tape/table.
-
Z - can't ya just post it here?
-
What post are you using? I believe there is a setting in the mp_master post that retracts the z axis home before any indexing occurs.
-
Changing User Profiles from Computer to Computer
spade117 replied to Mic6's topic in Industrial Forum
Why? -
It looks as though the file must be some form of a .mcx file for the "open with X5" option to be there.
-
At least ya figured it out.
-
I just opened mine and it is still set to the directory I changed it to.
-
No results come up for that term.
-
It was also talked about here.
-
Thx Andre.
-
Yes, you just have to reassign all the paths for them though.
-
When I go to edit operation defaults in my control def, the options are greyed out: But when I load the machine type, it comes out like this: How do I get the settings to what I want?
-
Do you know exactly what was modified?
