Greg Williams
-
Posts
2,221 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Greg Williams
-
Angle Calculation between vectors
Greg Williams replied to BehindYou's topic in Post Processor Development Forum
Nice work -
Mastercam Code Expert Dispatcher Error
Greg Williams replied to mackenzieruiter's topic in Industrial Forum
Correct it is a windows update that is causing this error -
Incorrect 5x feederates on Siemens 840d
Greg Williams replied to Manofwar's topic in Machining, Tools, Cutting & Probing
A Mastercam zip2go would help, the more info you have the easier the solution is to find -
Wanted: Old Mastercam versions... V2, V3, V4
Greg Williams replied to mark casella_1838's topic in Industrial Forum
I have a set of V2.01 disks here if that helps -
mill turn simulation 2022 Mill Turn Error :
Greg Williams replied to jh's topic in Machining, Tools, Cutting & Probing
Probably gonna have to offer a little more info, maybe a sample file, machine with the error etc- 1 reply
-
- 1
-
-
^^ Yep thats the go, waiting on that HX processor myself ^^
-
maybe too much work and not enough beer is starting to send me crazy too. Try these VPOTM VPMNT VPHUR VQDAT
-
Yes, but you will need to be a post guy to get it all running, there are no on/off switches ready to go. If you are a scripting guy then Colin has some great videos on Youtube that will show you the way.
-
Mill or Lathe?
-
Convert Inch to MM snippet.pst Maybe something like this. I am not sure where this one came from, I found it in my collection here. If the author is out there happy to credit them.
-
I think they have been working on it for the last 10 years Yes it is possible but you need to add a bunch of code to the post. If you are an experinced post guy that should not be too hard if you are not then paying somebody to do it will be a better solution
-
MasterCAM and Xilog plus
Greg Williams replied to Håkan Ahlvik Nautor's SWAN's topic in Industrial Forum
after 15 years Allan may be doing something else. Best start with your reseller -
having problems getting good code for a head table mag1
Greg Williams replied to lowcountrycamo's topic in Industrial Forum
Is it possible that the Vericut SIM is not working correctly? -
After 12 years he may not answer but maybe someone else will know
-
Can you upload a sample zip2go?
-
I see this when the temp folder has been cleaned out with Mastercam open. Normally HP/Dell etc system maintenace does this
-
The values are hardcoded and cannot be changed. Email QC so they register the request
-
Go with the fastest i9 you can find, I visited a customer with a new 12th Gen Intel Core i9-12900KS this one runs the benchmark file is 2mins 22 secs
-
Should be easy enough,just need to change the formatting for the tool
-
Sounds like the tool is defined as a mill tool and not a turnng tool
-
I use the part most of the time, the centre of the pallet is fine. the part works better for some as the operators can adjust the XYZ values in G68.2 (CALL OO88) for fine adjustment
-
Dave you will need a post linked to Machine SIM or something like NC2check, or the recently released IMSce for Mastercam
-
This one controls retract to the selected clearance plane
-
I normally add an error message to the post if the peck height is 0 for cycle 205. As you said no hole is drilled
-
Are you running a 5 axis post? The machine looks to have 5 axis if B is locked at zero and A is moving? Always best to upload a zip2go as that will contain eveything the debuggers will need.
