Greg Williams
-
Posts
2,222 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Greg Williams
-
Toolpath for machining a fillet without a form tool?
Greg Williams replied to average_jonny's topic in Industrial Forum
Rich, Nice one, I haven't seen that before -
I have seen this issue with copied planes in 2020 and 2019, Hopefully 2020 Update 1 should improve this problem
-
Update the graphics driver to the latest one. NVIDIA P1000 is supported
-
I use these settings as a default, values are metric, So far I have not had any issues Roughing - G131 F11000 J2 E0.05 D0.01 I2 L20 R0.3 K0 P0.01 Q5 Finishing - G131 F11000 J1 E0.02 D0.01 I2 L20 R0.3 K0 P0.01 Q5
-
Does the machine have the DNC-B or DNC-DT option? If no then you cannot drip feed a program
-
Create a linked folder, save the below as a batch file and edit the paths mklink /d "C:\Users\Public\Documents\shared Mcam2019" "H:\MyDocs\MCAMtests\shared mcam2019" mklink /d "C:\Users\Greg\Documents\my mcam2019" "H:\MyDocs\MCAMtests\my mcam2019"
-
Okuma OSP700L DNC COMMUNICATIONS SETTINGS
Greg Williams replied to Richard Houldcroft's topic in Industrial Forum
Which protocol, RS232, DNC-B or DNC-DT? -
I think it is correct, you have a custom plane yes?
-
Yep that solution has been sitting there for 14 years until I needed it today, saved me a by bunch of time, gotta luv a forum
-
^^^^ Thank you thank you ^^^^
-
I have found CAMplete support to be excellent. Can you share a Mastercam file that does this?
-
There is a KB article on this http://kb.mastercam.com/KnowledgebaseArticle50653.aspx?Keywords=machine+sim
-
Update windows to 1903
-
Sheiki, Send me an email I will do what I can
-
I have a slightly newer card P2000 on a Dell 5530. Windows 10 1903 and driver 430.64
-
I would get Okuma to reinstall the software as a start
-
What is roughly the size of the part? Bigger than the chuck or smaller?
-
Send it to me I will take a look or Create a new format statement and use this one fs2 25 0.2t 0.2t #Decimal, absolute, 2 place with trailing fmt "F" 25 feed #Feedrate Dave was 18
-
Error - Auto Orientation Failed - How to Fix?
Greg Williams replied to Bill H's topic in Industrial Forum
I think the only solution is to rechain the contour -
Are there ANY tutorials on port expert?
Greg Williams replied to BTA's topic in Machining, Tools, Cutting & Probing
Mastercam 2020 still has Port expert. What areas are you after some info on? -
Have you got the M253 special mode option? I did some tests years ago on an A77, I pretty much had the same result as you with M250/251/252 I believe that this one will need super GI mode G05 P10000 to turn it on
-
Does the machine have the TCP option?
-
4th axis verify with chuck model
Greg Williams replied to Born to machine's topic in Industrial Forum
Yes, you can either draw the chuck or import it. Set the chuck as a fixture in simulator options -
Has anybody else set up a 5 ax post for the new DMU-60 EVO
Greg Williams replied to pullo's topic in Industrial Forum
Seems odd that you need to add 150 to the C axis, somewhere in there you will be able to set the zero position. What post are you using? Could always say p_out = p_out+150? -
Has anybody else set up a 5 ax post for the new DMU-60 EVO
Greg Williams replied to pullo's topic in Industrial Forum
I am not a Heidenhain guy but they must be a way to move the C axis machine zero point?
