Dataword Spec code. - You don't have the TCP option

So what does that say in English? I run pretty much the same as Ron in Metric (POST - OKUMA-MU-TCP) (POST REV - 8.3) (DATE - 07-07-21) (TIME - 08:10) (MCX FILE - 5AX__2021.MCAM) (NC FILE - 5AX TEST.MIN) (T6|EMUGE 12250A |H6) VC200=0.2 (TOOL BREAKAGE TOLERANCE) M404 G0 G17 G40 G80 G90 G94 G0 G16 H0 Z999. M11 M27 G0 A0. C0. (EMUGE 12250A |TOOL - 6|DIA. OFF. - 6|LEN. - 6|TOOL DIA. - 12.) (TOP FACE 1) N1 T6(EMUGE 12250A TOOL - 6) M6 G15 H1 G0 G90 A-63.1049 C19.1142 S4000 M3 CALL OO88 PX=0. PY=0. PZ=0. PC=19.114 PA=-63.105 PH=1 PP=51 G0 X3.582 Y28.217 G56 HA Z101.04 G15 H1 M510 (CAS OFF) G169 HA G1 X-30.302 Y98.376 Z20.541 A-63.1049 C19.1142 F15000. M8 M51 M120 Y32.764 Z-.146 X-27.382 Y24.337 Z-4.67 X-24.462 Y15.911 Z-9.194 F800. X-24.458 Y15.913 Z-9.195 F1000. X-24.347 Y15.979 Z-9.246

What error do you get?

Exactly that, if one PC has 2 users then you need 2 licenses, one for each user logon as far as I understand

CAMplete is moving to Named user subscriptions

Essentially Verisurf has written information into the file, re saving it will get rid of the message

Here is an example from a Multus lathe, it write the days production to a folder then I use a scheduled task in windows to copy the file from MD1 to the server END.MIN

If it helps, here is what i get out of a very well used post. We only work in Metric here so the retract values are hard coded at 999 M19-1176-MD1020.MIN

I think this will work, but I have never done it in anger.

Hi Alex, You need the change the formatting for D and R in the post, your dealer can help with that, its a quick fix

Are the 2 switches turned on?

What does the error say when you press the info key?

I think this may work if you use Roll, Pitch Yaw G68.2 P1.

Could be a post issue, do you have a zip2go file that we can look at? Where did the post come from?

Could be any number of things, do you have a file you can share?

Sounds like something is wrong with your defaults, I have tested Mill-Turn on plenty of different configurations and so far have not found any paths that don't post. All of the toolpaths that Mill-Turn has seem to post including deburr. Did you migrate an old mill-turn environment by any chance? If yes then perhaps that is the issue with the defaults. Here is a deburr toolpath from Mill-Turn on an Integrex, its got a language warning as well. Deburr.mp4

^^ Yep what he said ^^ Use the best product you can afford, maybe that is just the free Machine SIM that comes with Mastercam. You can also upgrade the post so that Mastercam’s machine SIM is linked back to the post CAMplete is a great product for a reasonable cost. Vericut is the next level with next level features. At the end of the day these products are all cheaper than a spindle replacement on a quality machine

You have to set the shared folder location to a mapped drive P:\folder, we cannot have \\server\folder with Mill-Turn

Hi Guys, Has anybody done some testing on the new Win10 version 2004/20H2 setting for Hardware-accelerated GPU scheduling?

I think that file should be here C:\Users\Public\Documents\Shared Mastercam 2020\MATERIALS

Sounds like you are missing a file, create a zip2go and upload it if you want, someone here will know the answer

Update 2 did add some fixes but not sure to what extent

Its the same here mate

Yep that's better.

For a few hundred bucks extra a P2000 card will make a difference