MACHINEMASTERG
-
Posts
1,216 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by MACHINEMASTERG
-
you should also look into presetting the tool lenth off line since we went to this system i cant see it any other way ...we have a variety of commanly used tool that we all share with a tool tag and its lenth writen on it this way just put the lenth in the toollenth page and go
-
we also cut alot of delrin since it comes in over size to nomonal sizes in the sheets we cut them to like 2 foot sqaure and then have them double disc ground to size like .500 .75 1.00 etc when we make parts from the stock it stays good ...hth
-
like rick said does the haas have the high speed look ahead lighter depth faster feed ive run our haas in the 400 ipm range no problums
-
i always thought that the L was better for welding??????????????????
-
my boss would ask guys about there hobbies outside of work ...i guess it kinda gives you a fell about the guy or gal
-
i like the story a few weeks back of the guy who would bring you in on sat and pay you to make a part then he would check it for accuracy and finish this way he didnt waste too much time or money fining out what you were all about
-
id run thru the wcs tutoriol (sp) it gives a great example of this and then you will see the light
-
since your in colorado id ask if your working on a hot job and you get dumped on with fresh powder during the night are you working or boarding ???if boarding will you pick me up on the way to A-BASIN!!!!man i miss that beach
-
quote: Sir, The Hass has a peck tapping cycle that works very nice on deep hole tapping. it does ???we dont have it here is this a new feature what level software do you have in your controller ???how old is this machine id love to have peck tapping!!!
-
if they have the file open and you want to convert it into mcam cant doit
-
for those of us who have PRIZM ENG as our reseller i talked to the big guy over there john ewell(sp) and they are going to have a get to know x seminar after it is released im guessing up there in horsham if so ill get a chance to meet some of you guys from upstate pa
-
we had lead jobs here and we sent them out for waterjet !!!
-
id vote for the slitting saw also with a cold air gun blast but i also like the idea of alchol as a coolnt and it cleans as well also try frezing the parts in the frezer before machining and see what that does for the melting ???just a thought ive done this before when working with rubber and it solved some of my melting problums
-
it was no cost to me i did it when we sighned up for maintence ???
-
just got mine
-
welcome aboard nice first post
-
here to all of you im out see you all next year
-
to all a HAPPY AND A MERRY AND A PROSPEOUS>>YOU KNOW WHAT fill in the blanks see you all next year
-
call your haas factory outlet they will give you the help you need rite away
-
try prism eng in pa there probubly less than 1 1/2hrs from you and they are great bunch of guys and gals there phone #is 215-784-0800 or try prismeng.com i think??????
-
yea heard about this on a car forum i use some guys had wheel spacers done there they charged him 150.00 for 4 spacers and he said the quality sucked ...
-
well then the customer is always rite !!!
-
isnt 10 degree alot of draft???we go 3 degree teh most on our thermoform molds ...
-
yes it is we would have some goofie stuff happen back in the old days with hunting or moving around a little bit and someone told us to keep aux 1000 on and that worked ???we dont run long programes it there any more just 2nd op and 1 tool jobs ????i dont really no what to tell you but that machine has got to be around 12 plus years old ????
-
we have an old m anilam and we dont have that problume??? do you have aux1000 in the top of the programe ???
