Mike-T
-
Posts
267 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Mike-T
-
On the aircraft type parts I copy the part to a different level, leave 1 in its original location and orientation move the other to machining orientation. I create ref geo that I use to translate the part back and forth if need be.
-
I've always wanted to do this, what about coolant filtration ?
-
So in your drill point manager, sort state is off... I have had trouble in the past with it using creation order, but not for a long time. how many points are you dealing with ?
-
Your sure sorting is turned off ?? You picked them individually originally ?
-
All models are in relation to the nose of the aircraft.
-
Geometry Groups do you use them?
Mike-T replied to Ron Branch @ Verisurf's topic in Industrial Forum
"ops manager shuffle" Thats good ! -
I almost always output my files from top in mastercam. Unless its a simple setup, I don't use the interface to output my stock and design models
-
"Why is it that 99% of the resposibility of producing a part is that of the programmer" Because the work gravitates to the people that can do !! Are there Cmm and or smartscope programs needed ? Does there need to be capibility studies done ? gage r&r's ? supporting documentation ?
-
I just had something like this happen to me... but I don't use viewsheets.
-
I really like the dynamic milling, but seems like its only for pockets, has anyone done a core type with it ? any examples ?
-
I think all you should have to do is turn off the A axis in the local copy of the machine def.
-
Mastercam kicks me when I'm down (verify and planes)
Mike-T replied to Sbarner's topic in Industrial Forum
+1 with stl files not sticking. As far as the Front plane thing, sounds like you have different wcs plane active, at times I'll have to create a plane relative to my current wcs. -
I have the translator, For the most part it works fine. occasionally I'll have to step or parasolid out to Mastercam. I havn't tried to go from Mastercam back to Pro. Doubt it would work since all you would get into pro would be the brick. I have brought in some assemblies, nothing big. All components would have to be in same Directory as asm file. I don't think pdm would play nice.
-
How about the Verisurf utilites ??
-
There it is. I have those types of problems when I see the Gview not saved.
-
Right mouse click, rename always works for me.
-
dealer ?
-
This has happened a couple of times for me. I just let it do what it wanted. seemed to fix itself. Didn't effect my installation at all.
-
Pro-man has that ? didn't know that...
-
cycle time ??
-
+1 for adding an U, Its always reverse from the way I originaly think of it.
-
Here too !
-
ohoh...... here it comes.....
-
Mill Turn - Multi-thread Editor
Mike-T replied to Mark Baker CNC Software's topic in Industrial Forum
Ya... thats what I'm using, and typing M1... Like I asked...... what are you typing in for the search ???..Yes it finds them, but they not aligned correctly due to M1's and M13's etc.... be nice if I could type M100-M199 -
Mill Turn - Multi-thread Editor
Mike-T replied to Mark Baker CNC Software's topic in Industrial Forum
OK. Got that now. Most of our mill turns use M100-M199 for wait codes "modes" as you call them. whats the best way to search for them, I tried M1 but that grabs all M1's as well as M13's etc....