Mike-T
-
Posts
267 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Mike-T
-
Yes. I think it started around the time I installed Mu1. But I'm not sure, I also had changed a setting to do with Indexing un-known file types around the same time because my ability to search for a phrase in file had gone away. I don't know which happened 1st. Or if either one has anything to do with Mu1.
-
I couldn't fing any way of controlling it..
-
Copy Or Moving Entities From One Level To Another Bug
Mike-T replied to NeilJ's topic in Industrial Forum
No real issues here, Just an iritation. When I hit esc at the wrong time and it closes, it doesn't remember where it was, always goes back to the upper Lh corner. Seems like I'm always dragging it across the screen. Am I missing a setting somewhere ?? -
I don't have a problem with the concept, just figuring that after posting one would have to reverse the comp, and do something with the lead-in-out.
-
didn't do what I thought it should. Not even close.
-
hmmm... what to do with the comp ?
-
1000
-
Just ran into the same thing. The Tool file name on last page changed from pointing to a flatmill to a bullmill. And one of my bullmills changed to a flatmill, then it wouldn't stick until i regened the op. also "as defined" in tool profile area of verify params, or custom tools wouldn't show correct.
-
Hi Gunther, Love the tools. Many thanks. Just wondering..... what happened to the PP ? It came in pretty handy more than a few times for me. X3-mu1.
-
I would love to have a hot key for that, and to backplot selected ops as well.
-
are you kidding ????? That can't be right, I was told if we bought the maint, and upgraded to X it would be free, years ago now, been waiting, taken serious hits and lost credibility with management. Still nothing to show, and now its going to be something we have to pay for ???? I've already paid dearly. All the time lost pasting programs together, all time defending Mastercam. If we have to pay for it after putting up with all the bullsh!t, then even this die hard mastercamer (15 yrs or so) is done. sorry.
-
groove finish parameters, last tab under lathe plunge rough. there is a lead-in there. but most of the time i end up creating a seperate finish op and adjust plunge parameters and tool width comp, then you more control.
-
Delete Non-associative Geomerty?!?
Mike-T replied to John Hill @ Poplar Hill Machine's topic in Industrial Forum
You have a lot of entities that are blanked. Parent geo. unblank all, then delete. -
I'm up for that Randy !!!
-
I'd sure love to have a hot key for backplot !!
-
Stagger tooth have less tool pressure.
-
Try it on another position on the switch box.
-
John, The usage level is probably low due to the number of shops that do this kind of work. We use it often.
-
Under your gap setting you can use a tangential length.
-
Thanks Jay for the info. I apologize for the rant, And I know this isn't the place for it. But sometimes........
-
I'm with you Kaz. Rant-on I've been waiting and been told since before "X" that its coming. I even have a machine that my dealer says they won't make me a post for until it happens. Been waiting on that for 2 yrs now. I've used Mcam for 16 yrs and don't want to change. Breaks my heart to see them go with the Solid works thing, (we use pro-e), Simulation (we use Vericut) Art, and everything else instead of getting me the tools I need to do my job. My boss is pushing Gibbs. Sorry everybody, couldn't help it. Rant off.
-
I's and J's solved the problem for me.
-
Me too Please.......
-
coordinate rotation is the only way I know of.
-
I hate to see it all broke up if it effects searching.