9.1 in the mail...box

[CNCme]

Great evenin'

 

Well, I opened the mail box, and there it was,

9.1, from the great people @ Services4automation

Its been worth waiting for...gotta go, and

play, and to think all you beta testers must

be BORED.

 

Am I the last one to get 9.1.???

Or am I just the happiest.???

 

Tony G

Unemployed Programmer

N.E Massachusetts - Southern New Hampshire

_________________________________________

End mills and tooling are like The "AMMO"

and coolant and chips are like the enemy

under your boots as you advance in the

Manufacturing Battle.

_________________________________________

[gcode]

I'm a beta tester and I still don't have the final

release. Maybe the mailman left it on my front porch and the local hoodlums (ummm childern)

used it for a frisbee

[BernieT]

I think you must be the first to get 9.1

 

Still waiting here.........

 

Hurry mister postman........Pleeeaaaasse

[Saultspics]

Still wating for 9.1!

 

I talked with my dealer 4/3/03.

He has not received the consumers disks yet.The bad thing about this is we need the PRO-E convertor that comes with 9.1 to convert the new PRO-E wildfire part files that we use. So I have been sending them to our dealer to be converted then he sends them back to us as MC9 files.

[Guest CNC Apps Guy 1]

Not to brag but......

 

Actually I've had mine since they went out to burn the first time.

 

BTW, it's worth the wait. If you don't have it, call your resellers and ask for it.

[TheePres]

Im Bragging!!!

Have it here

[Die Sinker]

Our dealer in So. Cal. told us last week that we would get ours in about a month. Can't wait!

 

Gary Armitstead

Santa Fe Enterprises

Santa Fe Springs, CA

[Scott Bond]

Nothing yet.

"The checks in the mail."

[Brendan P]

Talked to my dealer S4A,

Should have it in the mail this coming week!

Yee Haaa....

[Mark H]

Got mine

[chris m]

I got mine from S4A as well; picked it up last week as I was out there for some training.

[jeff]

Patiently waiting!

[G Caputo]

Have had mine for 4 weeks now. Just wish I knew how to use it... Excellent forum, couldn't do this without you all.

[Jody]

quote:

---

Patiently waiting!

---

Jody

[cadcam]

I of coruse have been cutting with it sense 9.1 Beta3 full time.

 

I really like the changes.

 

I just had to open my mouth now did'nt I?

[MACHINEMASTERG]

just got our 9.1 release thanks prism eng for the fast mail out

[dan m]

no word on when 9.1 will be in here.

[MetalMarvels]

My copy showed up in today's mail. :-)

 

I am not happy that Meta-Cut keeps horning in though. Can't seem to load 9.1 without it showing up?????? It has some nice features BUT I DIDN'T ASK FOR IT!

[Guest CNC Apps Guy 1]

quote:

---

I am not happy that Meta-Cut keeps horning in though.

---

I did not want to install it either because my computer here at work is locked down tighter than a gnats @$$ strapped over a bass drum, and to get a program that uses real Open GL stuff running properly, sometimes takes some tweaking so I just didn't want to hassle it right now but the install made the decision for me

 

Overall though it's an outstanding package. It looks at G-Code and if you find a gouge, you can "pick" the gouge and it will show you the line of code that produced it. Very cool, but it sometimes takes some tweaking on the Video Card side which I cannot do so that is why I did not want to install it at this time. I would need the MIS guy here while I check things and he is quite busy. 1 guy about 50 PC's, one or two servers... you get the picture...

 

[ 04-08-2003, 08:23 PM: Message edited by: James Meyette ]

[Paul Elliott]

James,

MCU runs pretty well without hardware acceleration, and installs with OpenGL hardware acceleration turned off by default.

 

Gary (and James),

MCU is installed to the system with Mastercam, but no Mastercam integration is installed unless you run MCU once and allow us to make the changes. Even then, we tried to be as explicit as possible as to what's being installed, and provide checkboxes to prevent installation of anything you don't want.

And if all else fails, it's easy to disable our Mastercam integration and just have MCU Light on the side.

[Marty A]

just got mine today. just got done loading it in.now how to use it.lol.......motty

[David S]

We have gotten V9.1 for a while. Tested. Did not see any major advantage to us.

 

Since things are running well, why bother?

 

We are waiting for V10.

[Tony]

"There she Blow's"!

S.Wis/N.ILL. Check your Mail boxes Today.

[Toolfab]

You're right Tony, I got mine three minutes ago. Now for the install.

[Chris Rizzo]

Just got ours today...I've been running it out a school here for a few weeks. What's the consensus, fresh install, or just on top of V9? Havn't had a chance to even open the package yet..

Funny how I made time to hit the forum though!