-
Posts
759 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by [email protected]
-
quote: Instead of clicking the check mark click the red x. Hit Esc key twice and it will not go dirty HTH
-
quote: They were showing X5 at the show How do you know.......you were MIA
-
quote: I've just saved a thread for future use and have many more saved. Are my bookmarks going to be rendered useless with the "new" forum? I convert the pages I want into PDF. You can even add to an existing PDF if the thread gets a new post
-
quote: I save before Verify Yep, me too and save before posting code
-
^^^^^^
-
quote: In x5 it is quite improved as well. sssshhhhhhhhh you're not supposed to tell
-
huh huh huh...you said Sticky Member
-
Yep, got it. Thanx
-
quote: In windows setting change the decimal to maybe 4 places and see if that helps? Speakin of retard ......can someone tell me how to get to this setting in Windows 7?
-
Cool, good to see small shops get recognition
-
Got another new Beast last night. Its just like my other one but with win7 64bit and 12 gb RAM where my old one has xp 32bit and 4 gb RAM only using 3 Installing MC right now, will post benchmark time soon......I'm thinkin 15 seconds or less
-
He's prolly drunk......its late at night over there in Oz
-
:In my Homer Simpson voice: Dooohhhhh Yeah, what Thad said
-
^^^ Yes, go to Settings - config - colors and change "Auto Highlight color" to something other than color #14
-
Or, if you have trouble with ftp.....you can get it here http://www.mastercam.com/Support/Downloads...X4/Default.aspx
-
Goin on 6 years this October. Bossman bought THE 1st TM-8 Lathe at IMTS 2004 as a floor demo, then in '05 bought a VMX-50, then in '07 bought a VMX-42. The TM-8 was bought for a production delrin job and has paid for itself 10 times. We lost the prod. job last year and it doesn't get used very much....just the occasional Aluminum or plastic runs that come thru
-
quote: Dont ya just love it when they let the job sit on a desk for up to weeks past the due date Yeah, people work faster under pressure
-
We have had no mechanical trouble at all, but have had alot of controller/software trouble. When we first got the last of the 3 we have, the bossman threatened to hire a helicopter to raise it out of the building and drop it on Hurco headquarters LOL....we had LOTS of trouble with it, but it's finally strtaightened out :fingers crossed: It runs pretty much 24 hours 5 days a week 12,000 rpm 600 ipm cutting 48 Rc H-13
-
G18/G19 are swapped. If you are just gonna use G17 (X,Y Plane) it will be fine, but if you plan on doing 3D contouring you will need a Hurco specific post. I have several I would be glad to share if you need them.
-
Ron knows, but if he tells ya, he's gotta kill ya
-
quote: Now is there an easy way No You will have to do an uninstall/reinstall
-
Thanks Mike, JParis sent me an example to look at
-
It makes perfect sense to me. I use it alot, but I always transform all ops at the end of the file. I have been wondering how to do this for a while now because I have been wanting it to post G54, (toolpaths), G55, (toolpaths) etc. and at the start of the next tool start with G55 (toolpaths), G54, (toolpaths), etc. going back and forth between parts instead of rapiding back to G54 at the start of each tool. I'll experiment with it some, thanx
-
Can y'all share the outcome with the forum so everyone will know? Thanx
-
Making a dual monitor setup stick.
[email protected] replied to MotorCityMinion's topic in Industrial Forum
quote: You could pickup the left monitor and move it over to the right. Thats a good one