anyone see anything odd in program, i'm getting what almost looks like a double lead thread. it's a 1/8-27 on a 3.5" OD (90851216-1_8-27) (MMTIDENT-Integrex.txt) (POST - MPPOSTABILITY_MAZAK_INTEGREX_MARK_IV.PST) (PROGRAM - 90851216-1_8-27.EIA) (TIME - 12:18 PM) (T24 - 1/8-27 PIPE THREAD MILL - D024 - D0.3010") G109 L1 G00 G19 G20 G40 G80 G28 U0. Y0. G28 W0. N1 (C-AXIS CROSS DRILL) M8 G122.1 M901 M200 T24 M6 (1/8-27 PIPE THREAD MILL) G00 G28 U0. V0. G28 W0. G97 S1015 M203 M248 G53.5 G19 M250 M212 B90. C337.5 M251 G53.5 G98 Z-.275 X1.85 Y0. G1 (G91) U-.6 F10. G1 G41 V-.019 F1.2 G3 W0. V.048 U.0185 K0. J.024 (J.0224 was a typo i already fixed) G3 W-.0293 V-.029 U.0093 K-.0001 J-.0291 F1.2 G3 W.0293 V-.0296 U.0093 K.0294 J.0001 G3 W.0299 V.0296 U.0093 K.0001 J.0297 G3 W-.0299 V.0302 U.0093 K-.03 J.0001 G3 W0. V-.0492 U.0185 K0. J-.0246 G1 G40 W0. V.019 F10. G1 U-.0741 G1 G41 V-.019 F1.2 G3 W0. V.068 U.0185 K0. J.034 G3 W-.0493 V-.049 U.0093 K-.0001 J-.0491 F1.2 G3 W.0493 V-.0496 U.0093 K.0494 J.0001 G3 W.0499 V.0496 U.0093 K.0001 J.0497 G3 W-.0499 V.0502 U.0093 K-.05 J.0001 G3 W0. V-.0692 U.0185 K0. J-.0346 G0 G40 W0. V.019 G1 U-.0741 G1 G41 V-.019 F1.2 G3 W0. V.068 U.0185 K0. J.034 G3 W-.0493 V-.049 U.0093 K-.0001 J-.0491 F1.2 G3 W.0493 V-.0496 U.0093 K.0494 J.0001 G3 W.0499 V.0496 U.0093 K.0001 J.0497 G3 W-.0499 V.0502 U.0093 K-.05 J.0001 G3 W0. V-.0692 U.0185 K0. J-.0346 G0 G40 W0. V.019 X1.85 X4. M9 M205 G28 U0. Y0. G28 W0. M250 M212 G28 B0. C0. M30 G109 L1 G00 G18 G20 G40 G80 G28 U0. G28 W0. M30

can you print to PDF first then plot the PDF

old machine we had like that we mounted a 4" plate to the whole table then we could machine with shorter holders and add whatever slots and holes we needed

i still have a working v3 at home on an old computer, i'll se if i can fire it up

there is a setting if you want to use a different D comp # than the Tool # also

I know on a haas if you set large tool in tool settings it will keep pocket on either side empty, maybe something similar

works for me

break it up into 4 sides

for us the option sync's the spindle and chuck and feedrate

we did this on a Mazak Integrex and hobbing is an option, are you sure you have it

i like to put surfaces on one level and wireframe on another, makes it easy to turn one off

don't think I would work in a shop without AC, and we have 20-25 foot ceilings

one surface at a time

yes, right click in the contents of a tab and customize the ribbon

go to file , open in editor, then find the folder for your post. shared Mcam2017 mill posts

yes you can apply textures in Art. had to do some before that was like sand

used to work with a guy that would do background color entities all the time instead of hiding or putting them on another level

I think you miss it sometimes

you can take the teacher out of the classroom but you can't take the teacher out of JP

it was many moons ago but on ours I think it was G29T1001X0.0Z0.0 G29T1002X0.0Z0.0 G29T1003X0.0Z0.0 G29T1004X0.0Z0.0 G29T1005X0.0Z0.0 G29T1006X0.0Z0.0 where x was cc and z was tool length

I made covers for our surface plates , not one is used!

might have trouble with blowouts on the waterjet, piercing tends to shatter

it still sucks to machine, doing some 625 parts right now

I would make a pocket and "surface finish contour"

must be your post, it has C moves when I post it