htm01
-
Posts
1,189 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by htm01
-
go to grab cad, there is a bunch of them
-
that's the engraving macro that comes on a Haas
-
Looking for cemented carbide diamond coated endmills mini
htm01 replied to danielm's topic in Industrial Forum
why do you need diamond on aluminum? -
reverse the normal on the rad surface your trying to cut on the inside
-
MSC sale prices get locked in, its nice in that you know what tools you have and where they are and how many. there are a lot of reports you can run and see how much tooling you are using and who is using it.
-
https://www.mscdirect.com/product/details/09672510 http://www.harveytool.com/ToolTechInfo.aspx?ToolNumber=70094 they make custom too
-
Wire EDM - high dielectric conductance
htm01 replied to Ewood42's topic in Machining, Tools, Cutting & Probing
medical extrusion side has a machine so we can get all we need -
Wire EDM - high dielectric conductance
htm01 replied to Ewood42's topic in Machining, Tools, Cutting & Probing
we never use tap water, reverse osmosis -
are you sure you have that option?
-
on our 2004 VMC setting 51 is for the door lock on and off but it resets when you power off.
-
the meaning of opt stop is optional, there has to be a setting or button to turn it on and off, unless your machine does not have it at all
-
you have to push the opt stop button on the machine too
-
How to draw a curve based on an algebra formula.
htm01 replied to cowpoke43's topic in Industrial Forum
here you go End Cap Brace.mcam -
try single words
-
plastic i would do a 5/8 or 3/4 hog ball parallel @90 100 ipm take 15 min
-
Creating curves on import or manually - different result
htm01 replied to Thad's topic in Industrial Forum
i just tried a .X_T and it had the same edge curves both ways, i didn't get the connector lines on the holes. could it have something to do with he type of file? -
make sure the ends are all trimmed to each other, or change the color and chain by color then you need to go in to set plunge parameters
-
sometimes I just have to draw a line connecting them
-
what year is the machine?
-
a little humor........... put your big boy panties on
-
The three steps of journey level machining
htm01 replied to nickbe10's topic in Machining, Tools, Cutting & Probing
i went through the same type of struggles with camworks, they preached it would do everything. except what we wanted it to do -
The three steps of journey level machining
htm01 replied to nickbe10's topic in Machining, Tools, Cutting & Probing
come on, tell us how you really feel! -
once upon a time ....... i heard of a setting #51
-
couldn't you rotate the piece 180 and the peel mill would start from off the piece
-
with the 12mm pitch screw it would over shoot at higher feeds, we ran the same programs on the moldmaker before we bought it, it was mold cavity work, big difference
